|
ㅡ |
Electronic devices, and "components" not controlled by 3A001. |
8542311000
8542312000
8542313000
8542314000 |
“Microprocessor microcircuits”, “microcomputer microcircuits”, and
microcontroller microcircuits having any of the following:
A performance speed of 5 GFLOPS or more and an arithmetic logic unit
with an access width of 32 bit or
more;
A clock frequency rate exceeding
25 MHz; or
a.3. More than one data or instruction bus or serial communication
port that provides a direct external interconnection between
parallel “microprocessor microcircuits” with a transfer rate of 2.5
Mbyte/s; |
8542321010
8542321020
8542321030
8542321090 |
Storage integrated circuits, as follows:
Electrical erasable programmable read-only memories (EEPROMs) with a
storage capacity;
b.1.a. Exceeding 16 Mbits per package for flash memory types; or
b.1.b. Exceeding either of the following limits for all other EEPROM
types:
b.1.b.1. Exceeding 1 Mbit per package; or
b.1.b.2. Exceeding 256 kbit per package and a maximum access time of
less than 80 ns;
b.2. Static random access memories (SRAMs) with a storage capacity:
b.2.a. Exceeding 1 Mbit per package;
or
b.2.b. Exceeding 256 kbit per package and a maximum access time of
less than 25 ns; |
8542311000
8542312000
8542313000
8542314000 |
Analog-to-digital converters having any of the following:
A resolution of 8 bit or more, but less than 12 bit, with an output
rate greater than 200 million words per
second;
A resolution of 12 bit with an output rate greater than 105 million
words per second; c.3. A resolution of more than 12 bit but equal to
or less than 14 bit with an output rate greater than 10 million
words per second; or
c.4. A resolution of more than 14 bit with an output rate greater
than 2.5 million words per second; |
8542311000
8542312000
8542313000
8542314000 |
d. Field programmable logic devices having a maximum number of
single-ended digital input/outputs between 200 and 700; |
8542311000
8542312000
8542313000
8542314000 |
e. Fast Fourier Transform (FFT) processors having a rated execution
time for a 1,024 point complex FFT of less than 1 ms; |
8542311000
8542312000
8542313000
8542314000 |
Custom integrated circuits for which either the function is unknown,
or the control status of the equipment in which the integrated
circuits will be used is unknown to the manufacturer, having any of
the following:
More than 144 terminals; or
A typical “basic propagation delay
time” of less than 0.4 ns; |
8542311000
8542312000
8542313000
8542314000 |
g. Traveling-wave “vacuum electronic devices,” pulsed or continuous
wave, as follows: g.1. Coupled cavity devices, or
derivatives thereof;
g.2. Helix devices based on helix,
folded waveguide, or serpentine
waveguide circuits, or derivatives
thereof, with any of the following:
g.2.a. An “instantaneous bandwidth”
of half an octave or more; and
g.2.b. The product of the rated
average output power (expressed in
kW) and the maximum operating
frequency (expressed in GHz) of more
than 0.2;
g.2.c. An “instantaneous bandwidth”
of less than half an octave; and
g.2.d. The product of the rated
average output power (expressed in
kW) and the maximum operating
frequency (expressed in GHz) of more
than 0. |
8543301000
8543309000 |
h. Flexible waveguides designed for use at frequencies exceeding 40
GHz; |
8543701000
8543709010
8543709090 |
Surface acoustic wave and surface skimming (shallow bulk) acoustic
wave devices (i.e., “signal processing” devices employing elastic
waves in materials), having either of the following:
i.1. A carrier frequency exceeding 1 GHz; or
i.2. A carrier frequency of 1 GHz or less; and
i.2.a. A frequency side-lobe rejection exceeding 55 Db;
i.2.b. A product of the maximum delay time and bandwidth (time in
microseconds and bandwidth in MHz) of more than 100; or
i.2.c. A dispersive delay of more than 10 microseconds; |
8506500000
8507602000
8507603000
8507609000 |
Cells as follows:
j.1. Primary cells having an energy density of 550 Wh/kg or less at
293
K (20ºC);
j.2. Secondary cells having an energy density of 350 Wh/kg or less
at 293 K (20ºC);
Note: paragraph j does not control batteries, including single cell
batteries.
TechnicalNotes:
1.For the purpose ofparagraphj energydensity(Wh/kg)iscalculated
fromthe nominalvoltage multiplied by the nominal capacity in
ampere-hoursdividedbythemassin kilograms.Ifthenominalcapacityis not
stated, energy density is calculated from the nominal voltage
squared then multiplied by the discharge durationinhoursdivided
bythedischargeloadinOhmsand themassinkilograms.
2.Forthepurposeofparagraphj,a ‘cell’isdefinedasanelectrochemical
device, which has positive and negative electrodes, and electrolyte,
andisasourceofelectricalenergy. Itisthe basicbuilding blockofa
battery.
3.Forthepurposeofparagraphj.1,a ‘primarycell’isa‘cell’thatisnot
designedtobechargedbyanyother source.
4.Forthepurposeofparagraphj.2,a ‘secondary cell’ is a ‘cell’ that is
designed to be charged by an externalelectricalsource. |
8505901010
8505901090
8505902000
8505903000 |
k. “Superconductive” electromagnets or solenoids “specially
designed” to be fully charged or discharged in less than one minute,
having all of the following:
Note:paragraphkdoesnotcontrol “superconductive” electromagnets or
solenoids designed for Magnetic Resonance Imaging (MRI) medical
equipment.
k.1. Maximum energy delivered during the discharge divided by the
duration of the discharge of more than 500 kJ per minute;
k.2. Inner diameter of the current carrying windings of more than
250 mm; and
k.3. Rated for a magnetic induction of more than 8T or “overall
current density” in the winding of more than
300 A/mm2; |
8504409011
8504409019
8504409091
8504409099
8504509010
8504509090 |
Circuits or systems for electromagnetic energy storage, containing
“components” manufactured from “superconductive” materials
“specially designed” for operation at temperatures below the
“critical temperature” of at least one of their “superconductive”
constituents, having all of the following:
Resonant operating frequencies exceeding 1 MHz;
A stored energy density of 1
MJ/M3 or more; and
A discharge time of less than 1 ms; |
8540891000
8540892000
8540899000 |
m. Hydrogen/hydrogen-isotope thyratrons of ceramic-metal
construction and rate for a peak current of 500 A or more; |
8542311000
8542312000
8542313000 |
n. Digital integrated circuits based on any compound semiconductor
having an equivalent gate count of more than
300 (2 input gates); |
8541420000
8541430000 |
o. Solar cells, cell-interconnect-coverglass (CIC) assemblies, solar
panels, and solar arrays, which are “space qualified” and not
controlled by 3A001.e.4. |
|
ㅡ |
General purpose electronic equipment not controlled by 3A002. |
9030100000
9030200000
9030310000
9030320000
9030331000
9030391000
9030400000
9030820000
9030840000
9030890000
9030901000 |
a. Electronic test equipment, |
8542311000
8542312000
8542313000
8542314000
|
b. Digital instrumentation magnetic
tape data recorders having any of the
following characteristics;
b.1. A maximum digital interface
transfer rate exceeding 60 Mbit/s and employing helical scan
techniques;
b.2. A maximum digital interface transfer rate exceeding 120 Mbit/s
and employing fixed head techniques; or
b.3. “Space qualified”; |
8542311000
8542312000
8542313000
8542314000 |
c. Equipment, with a maximum digital interface transfer rate
exceeding 60 Mbit/s, designed to convert digital video magnetic tape
recorders for use as digital instrumentation data recorders; |
|
9030200000 |
d. Non-modular analog oscilloscopes having a bandwidth of 1 GHz or
greater; |
|
9030200000 |
Modular analog oscilloscope systems having either of the following
characteristics:
e.1. A mainframe with a bandwidth of
1 GHz or greater; or
e.2. Plug-in modules with an individual bandwidth of 4 GHz or
greater; |
|
9030200000 |
f. Analog sampling oscilloscopes for the analysis of recurring
phenomena with an effective bandwidth greater than 4 GHz; |
|
9030200000 |
g. Digital oscilloscopes and transient recorders, using
analog-to-digital conversion techniques, capable of storing
transients by sequentially sampling single-shot inputs at successive
intervals of less than 1 ns (greater than 1 giga-sample per second),
digitizing to 8 bits or greater resolution and storing 256 or more
samples.
Note: This controls the following “specially designed” “parts” and
“components” for analog oscilloscopes:
1.Plug-inunits;
2.Externalamplifiers;
3.Pre-amplifiers;
4.Samplingdevices;
5.Cathoderaytubes. |
|
ㅡ |
Specific processing equipment,, as follows |
8504402011
8504402019
8504402091
8504402099 |
a. Frequency changers capable of operating in the frequency range
from 300 up to 600 Hz; |
|
9027810000 |
b. Mass spectrometers; |
9022199000
9022299000
9022300000
9022909010 |
c. All flash x-ray machines, and “parts” or “components” of pulsed
power systems designed thereof, including Marx generators, high
power pulse shaping networks, high voltage capacitors, and triggers; |
9027891000
9027892090 |
Electronic equipment for time delay generation or time interval
measurement, as follows:
Digital time delay generators with a resolution of 50 nanoseconds or
less over time intervals of 1 microsecond or greater; or
Multi-channel (three or more) or modular time interval meter and
chronometry equipment with resolution of 50 nanoseconds or less over
time intervals of 1 microsecond or greater; |
|
ㅡ |
Equipment not controlled by 3B001 for the manufacture of electronic
“parts,” “components” and materials, and “specially designed”
“parts,” “components” and “accessories” therefor. |
8464201000
8464209000
8475100000 |
a. Equipment “specially designed” for the manufacture of electron
tubes, optical elements and “specially designed” “parts” and
“components” therefor controlled by 3A001 or
paragraph 1; |
8486102000
8486103010
8486103020
8486103090 |
b. Equipment “specially designed” for the manufacture of
semiconductor devices, integrated circuits and “electronic
assemblies”, as follows, and systems incorporating or having the
characteristics of such equipment:
Note: Paragraph b also controls equipmentusedormodifiedforuse
inthemanufactureofotherdevices, such as imaging devices,
electro-opticaldevices,acoustic-wave devices. |
8486102000
8486103010
8486103020
8486103090 |
b.1. Equipment for the processing of materials for the manufacture
of devices, “parts” and “components” as specified in the heading of
paragraph b, as follows:
Note:Paragraph4doesnotcontrol quartz furnacetubes,furnaceliners,
paddles, boats (except “specially designed” caged boats), bubblers,
cassettes or crucibles “specially designed” for the processing
equipmentcontrolledbyb.1. |
8486102000
8486103010
8486103020
8486103090 |
b.1.a. Equipment for producing polycrystalline silicon and materials
controlled by 3C001; |
8486102000
8486103010
8486103020
8486103090 |
b.1.b. Equipment “specially designed” for purifying or processing
III/V and II/VI semiconductor materials controlled by 3C001, 3C002,
3C003, 3C004, or 3C005 except crystal pullers, for which see
paragraph
4.b.1.c below; |
8486102000
8486103010
8486103020
8486103090 |
b.1.c. Crystal pullers and furnaces, as follows:
Note: Paragraph b.1.c does not control diffusion and oxidation
furnaces.
b.1.c.1. Annealing or recrystallizing equipment other than constant
temperature furnaces employing high rates of energy transfer capable
of processing wafers at a rate exceeding
0.005 m2 per minute;
b.1.c.2. “Stored program controlled” crystal pullers having any of
the following characteristics:
b.1.c.2.a. Rechargeable without
replacing the crucible container;
b.1.c.2.b. Capable of operation at pressures above 2.5 x 105 Pa;
orb.1.c.2.c. Capable of pulling crystals of a diameter exceeding 100
mm; |
8486102000
8486103010
8486103020
8486103090 |
b.1.d. “Stored program controlled” equipment for epitaxial growth
having any of the following characteristics:
b.1.d.1. Capable of producing silicon layer with a thickness uniform
to less than ± 2.5% across a distance of 200 mm or more;
b.1.d.2. Capable of producing a layer of any material other than
silicon with a thickness uniformity across the wafer of equal to or
better than ±
3.5%; or
b.1.d.3. Rotation of individual wafers during processing; |
8486102000
8486103010
8486103020
8486103090 |
b.1.f. Magnetically enhanced
‘sputtering’ equipment with “specially designed” integral load locks
capable of transferring wafers in an isolated vacuum environment; |
8486102000
8486103010
8486103020
8486103090 |
b.1.g. Equipment “specially designed” for ion implantation,
ion-enhanced or photo-enhanced diffusion, having any of the
following characteristics:
b.1.g.1. Patterning capability;
b.1.g.2. Beam energy (accelerating voltage) exceeding 200 keV;
b.1.g.3 Optimized to operate at a beam energy (accelerating voltage)
of less than 10 keV; or
b.1.g.4. Capable of high energy oxygen implant into a heated
“substrate”; |
8486102000
8486103010
8486103020
8486103090 |
b.1.h. “Stored program controlled” equipment for the selective
removal (etching) by means of anisotropic dry methods (e.g.,
plasma), as follows:
b.1.h.1. Batch types having either of the following:
b.1.h.1.a. End-point detection, other than optical emission
spectroscopy types; or
b.1.h.1.b. Reactor operational (etching) pressure of 26.66 Pa or
less;
b.1.h.2. Single wafer types having any of the following:
b.1.h.2.a. End-point detection, other than optical emission
spectroscopy
types;
b.1.h.2.b. Reactor operational (etching) pressure of 26.66 Pa or
less; or b.1.h.2.c. Cassette-to-cassette and load locks wafer
handling;
Notes:
1.“Batchtypes”referstomachines not “specially designed” for
production processing of single wafers. Such machines can process
two or more wafers simultaneously with common process parameters,
e.g., RF power, temperature, etch gasspecies,flowrates.
2. “Single wafer types” refers to machines “specially designed” for
production processing of single wafers. These machines may use
automatic wafer handling techniques to load a single wafer into the
equipment for processing. The definitionincludesequipmentthatcan
loadandprocessseveralwafersbut where the etching parameters, e.g.,
RF power or end point, can be independently determined for each
individualwafer. |
8486102000
8486103010
8486103020
8486103090 |
b.1.i. “Chemical vapor deposition”
(CVD) equipment, e.g., plasma-enhanced CVD (PECVD) or photo-enhanced
CVD, for semiconductor device manufacturing, having either of the
following capabilities, for deposition of oxides, nitrides, metals
or polysilicon:
b.1.i.1. “Chemical vapor deposition” equipment operating below 105
Pa; or
b.1.i.2. PECVD equipment operating either below 60 Pa (450
millitorr) or having automatic cassette-to-cassette and load lock
wafer handling;
Note: Paragraph b.1.i does not controllowpressure“chemicalvapor
deposition” (LPCVD) systems or reactive“sputtering”equipment. |
8486102000
8486103010
8486103020
8486103090 |
b.1.j. Electron beam systems
“specially designed” or modified for mask making or semiconductor
device processing having any of the following characteristics:
b.1.j.1. Electrostatic beam deflection;
b.1.j.2. Shaped, non-Gaussian beam
profile;
b.1.j.3. Digital-to-analog conversion rate exceeding 3 MHz;
b.1.j.4. Digital-to-analog conversion accuracy exceeding 12 bit; or
b.1.j.5. Target-to-beam position feedback control precision of 1
micrometer or finer;
Note: Paragraph b.1.j does not control electron beam deposition
systemsorgeneralpurposescanning electronmicroscopes. |
8486102000
8486103010
8486103020
8486103090 |
b.1.k. Surface finishing equipment for the processing of
semiconductor wafers as follows:
b.1.k.1. “Specially designed” equipment for backside processing of
wafers thinner than 100 micrometer and the subsequent separation
thereof; or
b.1.k.2. “Specially designed” equipment for achieving a surface
roughness of the active surface of a processed wafer with a
two-sigma value of 2 micrometer or less, total indicator reading
(TIR);
Note: paragraph b.1.k does not control single-side lapping and
polishingequipmentforwafersurface finishing. |
9011201010
9011201090 |
b.1.m. “Stored program controlled” equipment using “lasers” for the |
9031412000
9031419000 |
repair or trimming of “monolithic integrated circuits” with either
of the following characteristics:
b.1.m.1. Positioning accuracy less than
± 1 micrometer; or
b.1.m.2. Spot size (kerf width) less than 3 micrometer. |
|
ㅡ |
b.2. Masks, mask “substrates,” mask-making equipment and image
transfer equipment for the manufacture of devices, “parts” and
“components” as specified in the heading of 25, as follows:
Note: The term “masks” refers to those used in electron beam
lithography, X-ray lithography, and
ultravioletlithography,aswellasthe usual ultraviolet and visible
photo-lithography. |
3701991000
3701999100
3701999200
3701999900 |
b.2.a. Finished masks, reticles and designs therefor, except:
b.2.a.1. Finished masks or reticles for the production of
unembargoed
integrated circuits; or
b.2.a.2. Masks or reticles, having both of the following
characteristics: b.2.a.2.a. Their design is based on geometries of
2.5 micrometer or more; and
b.2.a.2.b. The design does not include special features to alter the
intended use by means of production
equipment or “software”; |
3701991000
3701999100
3701999200
3701999900 |
b.2.b. Mask “substrates” as follows:
b.2.b.1. Hard surface (e.g., chromium, silicon, molybdenum) coated
“substrates” (e.g., glass, quartz, sapphire) for the preparation of
masks having dimensions exceeding 125 mm x 125 mm; or
b.2.b.2. “Substrates” “specially
designed” for X-ray masks; |
8486102000
8486103010
8486103020
8486103090 |
b.2.c. Equipment, other than general purpose computers, “specially
designed” for computer aided design (CAD) of semiconductor devices
or
integrated circuits; |
8486102000
8486103010
8486103020
8486103090 |
b.2.d. Equipment or machines, as
follows, for mask or reticle
fabrication:
b.2.d.1. Photo-optical step and repeat
cameras capable of producing arrays
larger than 100 mm x 100 mm, or
capable of producing a single
exposure larger than 6 mm x 6 mm in the image (i.e., focal) plane,
or
capable of producing line widths of
less than 2.5 micrometer in the
photoresist on the “substrate”;
b.2.d.2. Mask or reticle fabrication
equipment using ion or “laser” beam
lithography capable of producing line
widths of less than 2.5 micrometer; or
b.2.d.3. Equipment or holders for
altering masks or reticles or adding
pellicles to remove defects;
Note: paragraph b.2.d.1 and b.2.d.2 do
not control mask fabrication
equipment using photo-optical
methods which was either
commercially available before the 1st
January, 1980, or has a performance
no better than such equipment. |
9011201010
9011201090
9031412000
9031419000 |
b.2.e. “Stored program controlled” equipment
for the inspection of masks, reticles
or pellicles with:
b.2.e.1. A resolution of 0.25 micrometer
or finer; and
b.2.e.2. A precision of 0.75 micrometer
or finer over a distance in one or two
coordinates of 63.5 mm or more;
Note: paragraph b.2.e does no control general purpose scanning
electron microscopes except when
“specially designed” and instrumented
for automatic pattern inspection |
8486102000
8486103010
8486103020
8486103090 |
b.2.f. Align and expose equipment for wafer production using
photo-optical or X-ray methods, e.g., lithography equipment,
including both projection image transfer equipment and step and
repeat (direct step on wafer) or step and scan (scanner) equipment,
capable of performing any of the following functions:
Note:paragraphb.2.fdoesnotcontrol photo-optical contact and
proximity maskalignandexposeequipmentor
contactimagetransferequipment.
b.2.f.1. Production of a pattern size of less than 2.5 micrometer;
b.2.f.2. Alignment with a precision finer than ± 0.25 micrometer (3
sigma);
b.2.f.3. Machine-to-machine overlay no better than ± 0.3 micrometer;
or
b.2.f.4. A light source wavelength shorter than 400 nm; |
8486102000
8486103010
8486103020 |
b.2.g. Electron beam, ion beam or X-ray equipment for projection
image transfer capable of producing patterns |
|
8486103090 |
less than 2.5 micrometer;
Note: For focused, deflected-beam systems(directwrite systems), see
paragraphb.1.jorb.10. |
8486203000
8486204000
8486206010
8486207000 |
b.2.h. Equipment using “lasers” for direct write on wafers capable
of producing patterns less than 2.5 micrometer. |
8486203000
8486204000
8486206010
8486207000 |
b.3. Equipment for the assembly of
integrated circuits, as follows:
b.3.a. “Stored program controlled” die
bonders having all of the following
characteristics:
b.3.a.1. “Specially designed” for
“hybrid integrated circuits”;
b.3.a.2. X-Y stage positioning travel
exceeding 37.5 x 37.5 mm; and
b.3.a.3. Placement accuracy in the
X-Y plane of finer than ± 10
micrometer;
b.3.b. “Stored program controlled”
equipment for producing multiple
bonds in a single operation (e.g.,
beam lead bonders, chip carrier
bonders, tape bonders);
b.3.c. Semi-automatic or automatic hot
cap sealers, in which the cap is heated locally to a higher
temperature
than the body of the package,
“specially designed” for ceramic
microcircuit packages controlled by
3A001 and that have a throughput
equal to or more than one package
per minute.
Note: paragraph b.3 does not control
general purpose resistance type spot
welders |
8421999031
8421999039
8421999099 |
b.4. Filters for clean rooms capable of providing an air environment
of 10 or less particles of 0.3 micrometer or smaller per 0.02832 m3
and filter materials therefor. |
|
ㅡ |
Equipment not controlled by 3B002 for the inspection or testing of
electronic “components” and materials, and “specially designed”
“parts,” “components” and “accessories” therefor. |
9031809060
9031809091
9031809099 |
a. Equipment “specially designed” for the inspection or testing of
electron tubes, optical elements and “specially designed” “parts”
and “components” therefor controlled by 3A001 or
paragraph 1; |
9030820000
9031412000
9031419000 |
b. Equipment “specially designed” for the inspection or testing of
semiconductor devices, integrated circuits and “electronic
assemblies”, as follows, and systems incorporating or having the
characteristics of such equipment:
Note: Paragraph b also controls equipmentusedormodifiedforuse
intheinspectionortestingofother devices, such as imaging devices,
electro-opticaldevices,acoustic-wave devices. |
9030820000
9031412000
9031419000 |
b.1. “Stored program controlled” inspection equipment for the
automatic detection of defects, errors or contaminants of 0.6
micrometer or less in or on processed wafers,
“substrates”, other than printed circuit boards or chips, using
optical image acquisition techniques for pattern comparison;
Note:paragraphb.1doesnotcontrol general purpose scanning electron
microscopes, except when “specially designed” and instrumented for
automaticpatterninspection. |
9030820000
9031412000
9031419000 |
b.2. “Specially designed” “stored program controlled” measuring and
analysis equipment, as follows:
b.2.a. “Specially designed” for the measurement of oxygen or carbon
content in semiconductor materials;
b.2.b. Equipment for line width measurement with a resolution of 1
micrometer or finer;
b.2.c. “Specially designed” flatness measurement instruments capable
of measuring deviations from flatness of 10 micrometer or less with
a resolution of 1 micrometer or finer. |
9030820000
9031412000
9031419000 |
b.3. “Stored program controlled” wafer probing equipment having any
of the following characteristics:
b.3.a. Positioning accuracy finer than
3.5 micrometer;
b.3.b. Capable of testing devices having more than 68 terminals; or
b.3.c. Capable of testing at a frequency
exceeding 1 GHz; |
|
ㅡ |
b.4. Test equipment as follows:
b.4.a. “Stored program controlled” equipment “specially designed”
for testing discrete semiconductor devices and unencapsulated dice,
capable of testing at frequencies exceeding 18 GHz;
TechnicalNote:Discretesemiconductor devicesinclude
photocellsandsolar cells.
b.4.b. “Stored program controlled” equipment “specially designed”
for testing integrated circuits and “electronic assemblies” thereof,
capable of functional testing: b.4.b.1. At a ‘pattern rate’
exceeding
20 MHz; or
b.4.b.2. At a ‘pattern rate’ exceeding
10 MHz but not exceeding 20 MHz
and capable of testing packages of
more than 68 terminals.
Notes: paragraph b.4.b does not
control test equipment “specially
designed” for testing:
1. Memories;
2. “Assemblies” or a class of
“electronic assemblies” for home and
entertainment applications; and
3. Electronic “parts,” “components,”
“assemblies” and integrated circuits
not controlled by 3A001 or paragraph
1 provided such test equipment does
not incorporate computing facilities
with “user accessible programmability”.
Technical Note: F or purposes of
paragraph b.4.b, ‘pattern rate’ is
defined as the maximum frequency of
digital operation of a tester. It is
therefore equivalent to the highest
data rate that a tester can provide in
non-multiplexed mode. It is also
referred to as test speed, maximum
digital frequency or maximum digit speed.
b.4.c. Equipment “specially designed”
for determining the performance of
focal-plane arrays at wavelengths of
more than 1,200 nm, using “stored
program controlled” measurements or
computer aided evaluation and having
any of the following characteristics:
b.4.c.1. Using scanning light spot
diameters of less than 0.12 mm;
b.4.c.2. Designed for measuring
photosensitive performance parameters
and for evaluating frequency response,
modulation transfer function,
uniformity of responsivity or noise; or
b.4.c.3. Designed for evaluating arrays
capable of creating images with more
than 32 x 32 line elements; |
9030820000
9031412000
9031419000 |
b.5. Electron beam test systems designed for operation at 3 keV or
below, or
“laser” beam systems, for non-contactive probing of powered-up
semiconductor devices having any of the following:
b.5.a. Stroboscopic capability with either beam blanking or detector
strobing;
b.5.b. An electron spectrometer for voltage measurements with a
resolution of less than 0.5 V; or b.5.c. Electrical tests fixtures
for performance analysis of integrated
circuits;
Note:Paragraphb.5doesnotcontrol scanning electron microscopes,
except when “specially designed” and
instrumentedfornon-contactiveprobing
ofapowered-upsemiconductordevice. |
9030820000
9031412000
9031419000 |
b.6. “Stored program controlled” multifunctional focused ion beam
systems “specially designed” for manufacturing, repairing, physical
layout analysis and testing of masks or semiconductor devices and
having either of the following characteristics:
b.6.a. Target-to-beam position feedback control precision of 1
micrometer or finer; or
b.6.b. Digital-to-analog conversion accuracy exceeding 12 bit;10
clean air or better. |
3920100000
8486901000
8486902030
8486902040 |
Positive resists designed for semiconductor lithography specially
adjusted (optimized) for use at wavelengths between 370 and 193 nm. |
|
ㅡ |
“Software” “specially designed” for the “development”, “production”,
or “use” of electronic devices, “parts” or “components” controlled
by paragraph 1, general purpose electronic equipment controlled by
paragraph 2, or manufacturing and test equipment controlled by
paragraph 4 and 5; or “software” “specially designed” for the “use”
of equipment controlled by 3B001..g and .h. |
|
ㅡ |
“Technology” for the “development,” “production” or “use” of
electronic devices, “parts” or “components” controlled by paragraph
1, general purpose electronic equipment controlled by paragraph 2,
or manufacturing and test equipment controlled by paragraph 4 or 5,
or materials controlled by paragraph 6. |
|
ㅡ |
Computers, “electronic assemblies”
and related equipment, not controlled
by 4A001 or 4A003, and “specially
designed” “parts” and “components”
therefor.
Note 1: The control status of the
“digital computers” and relate equipment described in paragraph 9
is determined by the control status of
other equipment or systems provided:
a. The “digital computers” or related
equipment are essential for the
operation of the other equipment or
systems;
b. The “digital computers” or related
equipment are not a “principal
element” of the other equipment or
systems; and
N.B. 1: The control status of “signal
processing” or “image enhancement”
equipment “specially designed” for
other equipment with functions
limited to those required for the
other equipment is determined by the
control status of the other equipment
even if it exceeds the “principal
element” criterion.
N.B. 2: For the control status of
“digital computers” or related
equipment for telecommunications
equipment, see see Category 5, P art
1 (Telecommunications).
c. The “technology” for the “digital
computers” and related equipment is
determined by 4E |
8471419000
8471499000 |
a. Electronic computers and related equipment, and “electronic
assemblies” and |
8471509000
8471809000 |
“specially designed” “parts” and
“components” therefor, rated for operation at an ambient temperature
above 343 K
(70°C); |
8471419000
8471499000
8471509000
8471809000 |
b. “Digital computers”, including equipment of “signal processing”
or image enhancement”, having an “Adjusted Peak Performance” (“APP”)
equal to or greater than 0.0128
Weighted TeraFLOPS (WT); |
8471419000
8471499000
8471509000
8471809000 |
“Electronic assemblies” that are “specially designed” or modified to
enhance performance by aggregation of processors, as follows:
c.1. Designed to be capable of aggregation in configurations of 16
or more processors;
Note1: paragraph 9.cappliesonlyto “electronic assemblies” and
programmableinterconnectionswitha “APP” not exceeding the limits in
paragraph 9.b, when shipped as unintegrated“electronicassemblies”.It
does not apply to “electronic assemblies” inherently limited by
nature of their design for use as related equipment controlled by
paragraph k.
Note2: paragraph 9.cdoesnotcontrol any “electronic assembly”
“specially designed”foraproductorfamilyof
productswhosemaximumconfiguration does not exceed the limits of
paragraph b. |
8471419000
8471499000
8471509000
8471809000 |
f. Equipment for “signal processing” or “image enhancement” having
an “Adjusted Peak Performance” (“APP”) equal to or greater than
0.0128
Weighted TeraFLOPS WT; |
8471419000
8471499000
8471509000
8471809000 |
i. Equipment containing “terminal interface equipment” exceeding the
limits in paragraph 14; |
8471419000
8471499000
8471509000
8471809000 |
j. Equipment “specially designed” to provide external
interconnection of “digital computers” or associated equipment that
allows communications at data rates exceeding 80 Mbyte/s.
Note:Paragraphjdoesnotcontrol internal interconnection equipment
(e.g., backplanes, buses) passive interconnection equipment,
“network accesscontrollers”or“communication channelcontrollers”. |
8471419000
8471499000
8471509000
8471809000 |
“Hybrid computers” and “electronic assemblies” and “specially
designed” “parts” and “components” therefor containing
analog-to-digital converters having all of the following
characteristics:
32 channels or more; and
A resolution of 14 bit (plus sign bit) or more with a conversion
rate of 200,000 conversions/s or more. |
|
ㅡ |
“Program” proof and validation “software,” “software” allowing the
automatic generation of “source codes,” and operating system
“software” that are “specially designed” for “real-time processing”
equipment |
|
ㅡ |
a. “Program” proof and validation “software” using mathematical and
analytical techniques and designed or modified for “programs” having
more than 500,000 “source code” instructions; |
|
ㅡ |
b. “Software” allowing the automatic generation of “source codes”
from data acquired on line from external sensors described in the
Appendix 2 and Appendix 2-2; or |
|
ㅡ |
c. Operating system “software” “specially designed” for “real-time
processing” equipment that guarantees a “global interrupt latency
time” of less than 20 microseconds. |
|
ㅡ |
Software” other than that 4D001 “specially designed” for the
“development”, “ “use” of equipment 4A101, 9. |
|
ㅡ |
“Technology” other than
in 4E001 for the
“production,” or “use” controlled by paragraph 9, or “software”
controlled by paragraph 10 or 11. |
|
ㅡ |
“Technology” for the “development” or “production” of equipment
designed for “multi-data-stream processing.” |
8517610000
8517621010
8517693000
8517694000
8517794000 |
Telecommunication equipmen, not controlled by 5A00 |
8517610000
8517621010
8517693000
8517694000
8517794000 |
a. Any type of telecommunications equipment, not controlled by
5A001.a, “specially designed” to operate outside the temperature
range from 219 K (-54 EC) to 397 K (124 EC). |
8517693000
8517694000 |
b. Telecommunication transmission equipment and systems, and
“specially designed” “parts,” “components” and “accessories”
therefor, having any of the following characteristics, functions or
features:
Note:Telecommunicationtransmission equipment:
a. Categorized as follows, or combinationsthereof:
1.Radioequipment(e.g.,transmitters, receiversandtransceivers);
2.Lineterminatingequipment;
3.Intermediateamplifierequipment;
4.Repeaterequipment;
5.Regeneratorequipment;
6.Translationencoders(transcoders);
7. Multiplex equipment (statistical mutiplexincluded);
8.Modulators/demodulators(modems);
Transmultiplex equipment (see CCITTRec.G701);
“Stored program controlled”
digitalcrossconnectionequipment;
11.‘Gateways’andbridges; 12.“Mediaaccessunits”;and
b. Designed for use in single or multi-channelcommunicationviaany
ofthefollowing: 1.Wire(line);
2.Coaxialcable;
3.Opticalfibercable;
4.Electromagneticradiation;or 5. Underwater acoustic wave
propagation.
b.1. Employing digital techniques, including digital processing of
analog signals, and designed to operate at a “digital transfer rate”
at the highest multiplex level exceeding 45 Mbit/s or a “total
digital transfer rate” exceeding 90 Mbit/s;
Note:Paragraphb.1doesnotcontrol equipment“speciallydesigned”tobe
integrated and operated in any satellitesystemforciviluse.
b.2. Modems using the ‘bandwidth of one voice channel’ with a “data
signaling rate” exceeding 9,600 bits per second;
b.3. Being “stored program controlled” digital cross connect
equipment with “digital transfer rate” exceeding 8.5 Mbit/s per
port.
b.4. Being equipment containing any of the following:
b.4.a. ‘Network access controllers’ and their related common medium
having a “digital transfer rate” exceeding 33
Mbit/s; or
b.4.b. “Communication channel controllers” with a digital output
having a “data signaling rate”
exceeding 64,000 bit/s per channel;
Note:Ifanyuncontrolledequipment contains a “network access
controller”,itcannothaveanytypeof telecommunications interface,
except thosedescribedin,butnotcontrolled byparagraphb.4.
b.5. Employing a “laser” and having any of the following
characteristics:
b.5.a. A transmission wavelength exceeding 1,000 nm; or
b.5.b. Employing analog techniques and having a bandwidth exceeding
45 MHz;
Note: Paragraph b.5.b does not controlcommercialTVsystems.
b.5.c. Employing coherent optical transmission or coherent optical
detection techniques (also called optical heterodyne or homodyne
techniques);
b.5.d. Employing wavelength division multiplexing techniques; or
b.5.e. Performing “optical amplification”;
b.6. Radio equipment operating at input or output frequencies
exceeding:
b.6.a. 31 GHz for satellite-earth
station applications; or
b.6.b. 26.5 GHz for other applications;
Note:Paragraphb.6.doesnotcontrol equipment for civil use when
conforming with an International Telecommunications Union (ITU)
allocatedbandbetween26.5GHzand 31GHz.
b.7. Being radio equipment employing any of the following:
b.7.a. Quadrature-amplitude-modulation
(QAM) techniques above level 4 if the “total digital transfer rate”
exceeds 8.5 Mbit/s;
b.7.b. QAM techniques above level 16 if the “total digital transfer
rate” is equal to or less than 8.5 Mbit/s;
b.7.c. Other digital modulation techniques and having a “spectral
efficiency” exceeding 3 bit/s/Hz; or
b.7.d. Operating in the 1.5 MHz to 87.5 MHz band and incorporating
adaptive techniques providing more than 15 dB suppression of an
interfering signal. Notes:
Paragraph b.7 does not control equipment“speciallydesigned”tobe
integrated and operated in any satellitesystemforciviluse.
Paragraph b.7 does not control radio relayequipmentfor operation
inanITUallocatedband:
a.Havinganyofthefollowing:
1.Notexceeding960MHz;or
a.2. With a “total digital transfer rate”notexceeding8.5Mbit/s;and
b.Havinga“spectralefficiency”not exceeding4bit/s/Hz. |
8517621010
8517621020
8517622030
8517622040 |
“Stored program controlled” switching equipment and related
signaling systems, having any of the following characteristics,
functions or features, and “specially designed” “parts,”
“components” and “accessories” therefor:
Note: Statistical multiplexers with
digitalinputanddigitaloutputwhich provide switching are treated as
“storedprogramcontrolled”switches.
c.1. “Data (message) switching” equipment or systems designed for
“packet-mode operation” and “parts,” electronic assemblies and
“components”
therefor,
c.2. Routing or switching of
‘datagram’ packets;
Note: The restrictionsinparagraph c.3 do not apply to networks
restricted to using only ‘network access controllers’ or to ‘network
accesscontrollers’themselves.
c.5. Multi-level priority and
pre-emption for circuit switching;
Note:Paragraphc.5doesnotcontrol single-levelcallpreemption.
c.6. Designed for automatic hand-off of cellular radio calls to
other cellular switches or automatic connection to a centralized
subscriber data base common to more than one switch;
c.7. Containing “stored program controlled” digital cross connect
equipment with “digital transfer rate” exceeding 8.5 Mbit/s per
port.
c.8. “Common channel signaling” operating in either non-associated
or quasi-associated mode of operation;
c.9. ‘Dynamic adaptive routing’; c.10. Being packet switches,
circuit switches and routers with ports or lines exceeding any of
the following:
c.10.a. A “data signaling rate” of 64,000 bit/s per channel for a
‘communications channel controller’; or
Note: Paragraph c.10.a does not control multiplex composite links
composed only of communication channelsnotindividuallycontrolledby
b.1.
c.10.b. A “digital transfer rate” of 33
Mbit/s for a ‘network access
controller’ and related common media;
Note: Paragraph c.10 does not control packet switches or routers
withportsorlinesnotexceedingthe limitsinc.10.
c.11. “Optical switching”;
c.12. Employing ‘Asynchronous Transfer Mode’ (‘ATM’) techniques. |
8536701000
8536702000
8536703010
8536703090 |
d. Optical fibers and optical fiber cables of more than 50 m in
length designed for single mode operation; |
|
8517610000 |
Centralized network control having all of the following
characteristics:
e.1. Receives data from the nodes; and
e.2. Process these data in order to provide control of traffic not
requiring operator decisions, and thereby
performing ‘dynamic adaptive routing’;
Note:Paragraphedoesnotpreclude control of traffic as a function of
predictablestatisticaltrafficconditions. |
| |
|
8517711000
8517719000
8529101000
8529109900 |
f. Phased array antennas, operating above 10.5 GHz, containing
active elements and distributed “parts” or “components,” and
designed to permit electronic control of beam shaping and pointing,
except for landing systems with instruments meeting International
Civil Aviation Organization (ICAO) standards (microwave landing
systems (MLS)). |
8517130000
8517149000
8517794000 |
g. Mobile communications equipment, , and “parts,” electronic
assemblies and “components” therefor; or |
8517621010
8517621020
8517622030
8517622040 |
h. Radio relay communications equipment designed for use at
frequencies equal to or exceeding 19.7 GHz and “parts” and
“components” therefor, |
9030100000
9030200000
9030310000
9030339000
9030399000
9030400000
9030820000
9030840000
9030890000
9030909000 |
Telecommunications test equipment, |
7002201000
7002209000 |
Preforms of glass or of any other material optimized for the
manufacture of optical fibers controlled by 14. |
|
ㅡ |
“Software” “specially designed” or modified for the “development,”
“production” or “use” of equipment controlled by paragraph 14 and
15, and dynamic adaptive routing software as described as follows:
a. “Software”, other than in machine-executable form, “specially
designed” for “dynamic adaptive routing”. |
|
ㅡ |
“Technology” for the “development”, “production” or “use” of
equipment controlled by paragraph 14 or 15, or “software” controlled
by 17, and other “technologies” as follows:
Specific “technologies” as follows:
“Technology” for the processing and application of coatings to
optical fiber “specially designed” to make it suitable for
underwater use;
“Technology” for the “development” of equipment employing
‘Synchronous Digital Hierarchy’ (‘SDH’) or ‘Synchronous Optical
Network’ (‘SONET’) techniques. |
|
ㅡ |
Commodities classified as mass market encryption commodities in
accordance with Cryptography Note – Note 3 to Category 5, Part 2.
Note: Paragraph 19 does not control When exporting as a wholly-owned
subsidiary of the parent company for civilian use. |
|
ㅡ |
“Software” classified as mass market encryption software in
accordance with Cryptography Note – Note 3 to Category 5, Part 2.
Note: Paragraph 20 does not control When exporting as a wholly-owned
subsidiary of the parent company for civilian use. |
|
ㅡ |
“Technology”,, for the “use” of mass market commodities controlled
by 19 or mass market “software” controlled by 20. |
|
9014800000 |
Marine or terrestrial acoustic equipment, , capable of detecting or
locating underwater objects or features or positioning surface
vessels or underwater vehicles; and “specially designed” “parts” and
“components,”
Optical Sensors, not controlled by 6A002, as follows: |
| |
|
9022901090
9022909090 |
Image intensifier tubes and “specially designed” “components”
therefor, as follows:
Image intensifier tubes having all the following:
A peak response in wavelength range exceeding 400 nm, but not
exceeding 1,050 nm;
A microchannel plate for electron image amplification with a hole
pitch (center-to-center spacing) of less than
25 micrometers; and
a.1.c. Having any of the following:
a.1.c.1. An S-20, S-25 or multialkali photocathode; or
a.1.c.2. A GaAs or GaInAs
photocathode;
a.2. “Specially designed” microchannel plates having both of the
following characteristics:
a.2.a. 15,000 or more hollow tubes per plate; and
a.2.b. Hole pitch (center-to-center spacing) of less than 25
micrometers. |
|
8525830000 |
b. Direct view imaging equipment operating in the visible or
infrared spectrum, incorporating image intensifier tubes having the
characteristics listed in 23.a.1. |
|
8525830000 |
Cameras, not controlled by 6A003 or
6A203, as follows:
a. Cameras that meet the criteria of
Note 3 to 6.A.3.b.4 |
9002201000
9002209000
8536703090 |
Optics, not controlled by 6A004, as follows :
Optical filters:
For wavelengths longer than 250 nm, comprised of multi-layer optical
coatings and having either of the following:
a.1.a. Bandwidths equal to or less than
1 nm Full Width Half Intensity (FWHI) and peak transmission of 90%
or more; or
a.1.b. Bandwidths equal to or less than 0.1 nm FWHI and peak
transmission of 50% or more;
Note:Paragraph25doesnotcontrol opticalfilterswithfixedairgapsor
Lyot-typefilters. a.2. For wavelengths longer than 250 nm, and
having all of the following:
a.2.a. Tunable over a spectral range of
500 nm or more;
a.2.b. Instantaneous optical bandpass of
1.25 nm or less;
a.2.c. Wavelength resettable within 0.1 ms to an accuracy of 1 nm or
better
within the tunable spectral range; and
a.2.d. A single peak transmission of
91% or more;
a.3. Optical opacity switches (filters) with a field of view of
30or wider and a response time equal to or less than 1 ns;
b. “Fluoride fiber” cable, or optical fibers therefor, having an
attenuation of less than 4 dB/km in the wavelength range exceeding
1,000 nm but not exceeding 3,000 nm. |
|
ㅡ |
“Lasers” as follows: |
|
9013200000 |
Carbon dioxide (CO2) “lasers” having any of the following:
A CW output power exceeding 10 kW;
A pulsed output with a “pulse duration” exceeding 10 microseconds;
and
a.2.a. An average output power exceeding 10 kW; or
a.2.b. A pulsed “peak power” exceeding 100 kW; or
a.3. A pulsed output with a “pulse duration” equal to or less than
10 microseconds; and
a.3.a. A pulse energy exceeding 5 J per pulse and “peak power”
exceeding
2.5 kW; or
a.3.b. An average output power
exceeding 2.5 kW; |
9013200000
9013802000
9013803000
9013809000 |
Semiconductor lasers, as follows:
Individual, single-transverse mode semiconductor “lasers” having:
An average output power exceeding 100 mW; or
A wavelength exceeding 1,050 nm;
Individual, multiple-transverse mode semiconductor “lasers”, or
arrays of individual semiconductor “lasers”, having a wavelength
exceeding 1,050 nm; |
|
9013200000 |
c. Ruby “lasers” having an output energy exceeding 20 J per pulse; |
|
9013200000 |
Non-“tunable” “pulsed lasers” having an output wavelength exceeding
975 nm but not exceeding 1,150 nm and having any of the following:
A “pulse duration” equal to or exceeding 1 ns but not exceeding 1 μ
s, and having any of the following:
A single transverse mode output and having any of the following:
A ‘wall-plug efficiency’ exceeding 12% and an “average output power”
exceeding 10 W and capable of operating at a pulse repetition
frequency greater than
1kHz; or
An “average output power” exceeding 20 W; or
A multiple transverse mode output and having any of the following:
A ‘wall-plug efficiency’ exceeding 18% and an “average
output power” exceeding 30W;
A “peak power” exceeding 200
MW; or |
|
9013200000 |
d.1.b.3. An “average output power” exceeding 50 W; or
d.2. A “pulse duration” exceeding 1 μ s and having any of the
following:
d.2.a. A single transverse mode output and having any of the
following:
d.2.a.1. A ‘wall-plug efficiency’ exceeding 12% and an “average
output power” exceeding 10 W and capable of operating at a pulse
repetition frequency greater than 1 kHz; or
d.2.a.2. An “average output power” exceeding 20 W; or
d.2.b. A multiple transverse mode output and having any of the
following:
d.2.b.1. A ‘wall-plug efficiency’ exceeding 18% and an “average
output power” exceeding 30 W; or
d.2.b.2. An “average output power” exceeding 500 W; e. Non-“tunable”
continuous wave “(CW) lasers”, having an output wavelength exceeding
975 nm but not exceeding 1,150nm and having any of the following:
e.1. A single transverse mode output and having any of the
following:
e.1.a. A ‘wall-plug efficiency’ exceeding 12% and an “average output
power” exceeding 10 W and capable of operating at a pulse repetition
frequency greater than 1 kHz; or
e.1.b. An “average output power” exceeding 50 W; or
e.2. A multiple transverse mode output and having any of the
following:
e.2.a. A ‘wall-plug efficiency’ exceeding 18% and an “average output
power” exceeding 30 W; or
e.2.b. An “average output power” exceeding 500 W;
Note: paragraph .e.2.b does not control multiple transverse mode,
industrial“lasers”withoutputpower lessthanor equal to 2kWwitha
totalmassgreaterthan1,200kg.For thepurposeofthisnote,totalmass
includesall“components”requiredto operate the “laser,” e.g.,
“laser,” power supply, heat exchanger, but excludes external optics
for beam conditioningand/ordelivery. |
|
9013200000 |
Non-“tunable” “lasers”, having a wavelength exceeding 1,400 nm, but
not exceeding 1555 nm and having any of the following:
An output energy exceeding 100 mJ per pulse and a pulsed “peak
power” exceeding 1 W; or
An average or CW output power exceeding 1 W; |
|
9013200000 |
g. Free electron “lasers.” |
|
ㅡ |
“Magnetometers” not controlled by 6A006, “Superconductive”
electromagnetic sensors, and “specially designed” “components”
therefor, as follows |
|
9015809000 |
a. “Magnetometers”, , having a ‘sensitivity’ lower (better) than 1.0
nT (rms) per square root Hz.
TechnicalNote:Forthepurposesof 27, ‘sensitivity’ (noise level) is
the root mean square of the device-limitednoisefloorwhichisthe
lowestsignalthatcanbemeasured. |
|
9015809000 |
“Superconductive” electromagnetic sensors, “components” manufactured
from “superconductive” materials:
b.1. Designed for operation at temperatures below the “critical
temperature” of at least one of their “superconductive” constituents
(including Josephson effect devices or
“superconductive” quantum
interference devices (SQUIDS));
b.2. Designed for sensing electromagnetic field variations at
frequencies of 1 KHz or less; and
b.3. Having any of the following characteristics:
b.3.a. Incorporating thin-film SQUIDS with a minimum feature size of
less than 2 μm and with associated input and output coupling
circuits;
b.3.b. Designed to operate with a magnetic field slew rate exceeding
1 x 106 magnetic flux quanta per
second;
b.3.c. Designed to function without magnetic shielding in the
earth’s ambient magnetic field; or
b.3.d. Having a temperature coefficient less (smaller) than 0.1
magnetic flux quantum/K. |
|
9015809000 |
Gravity meters (gravimeters) for ground use, , as follows:
a. Having a static accuracy of less (better) than 100 microgal; or
b. Being of the quartz element
(Worden) type. |
8526101000
8526109000 |
Radar systems, equipment and major “components,” , and “specially
designed” “components” therefor, as follows:
Airborne radar equipment, n.e.s., and “specially designed”
“components” therefor.
“Space-qualified” “laser” radar or Light Detection and Ranging
(LIDAR) equipment “specially designed” for surveying or for
meteorological observation.
Millimeter wave enhanced vision radar imaging systems “specially
designed” for rotary wing aircraft and having all of the following:
Operates at a frequency of 94 GHz;
An average output power of less than 20 mW;
Radar beam width of 1 degree; and
Operating range equal to or greater than 1500 m. |
9031491000
9031494010
9031494090
9031499000 |
Equipment, including tools, dies, fixtures or gauges, and other
“specially designed” “parts,” “components” and “accessories”
therefor, “specially designed” or modified for any of the following:
For the manufacture or inspection of:
Free electron “laser” magnet
wigglers;
Free electron “laser” photo
injectors;
For the adjustment, to required tolerances, of the longitudinal
magnetic field of free electron
“lasers”. |
|
8536701000 |
Optical sensing fibers not controlled by |
8536702000
8536703010
8536703090 |
6A002.d.3 that are modified structurally to have a ‘beat length’ of
less than 500 mm (high birefringence) or optical sensor materials
not described in 6.C.2.b and having a zinc content of equal to or
more than 6% by ‘mole fraction.’ |
2826120000
2826199000
7002209000
7002201000
7002209000 |
Optical materials, as follows:
Low optical absorption materials, as follows:
Bulk fluoride compounds containing ingredients with a purity of
99.999% or better; or
Note: paragraph .a.1 controls fluorides ofzirconium or aluminum
andvariants.
Bulk fluoride glass made from compounds controlled by 6C004.e.1;
‘Optical fiber preforms’ made from bulk fluoride compounds
containing ingredients with a purity of 99.999% or better,
“specially designed” for the manufacture of ‘fluoride fibers’
controlled by paragraph b. |
|
ㅡ |
“Software,” , “specially designed” for the “development”,
“production”, or “use” of commodities controlled by 6A002, 6A003,
paragraph 22, 27, 28 or
29. |
|
ㅡ |
“Software” “specially designed” for the “development” or
“production” of equipment controlled by paragraph 23, 25 or 26. |
|
ㅡ |
Other “software,” not controlled by 6D003:
Air Traffic Control (ATC)
“software” application “programs” hosted on general purpose
computers located at Air Traffic Control centers, and capable of
automatically handing over primary radar target data (if not
correlated with secondary surveillance radar (SSR) data) from the
host ATC center to another ATC center.
“Software” “specially designed” for seismic intrusion detection
systems in paragraph 30.c. c. “Source Code” “specially designed” for
seismic intrusion detection systems in paragraph 30.c. |
|
ㅡ |
Other “technology”, not controlled by 6E003:
a. Optical fabrication technologies for serially producing optical
“parts” and “components” at a rate exceeding 10 m2 of
surface area per year on any single spindle and having all of the
following:a.1. Area exceeding 1 m2; and
a.2. Surface figure exceeding λ/10
(rms) at the designed wavelength;
“Technology” for optical filters with a bandwidth equal to or less
than 10 nm, a field of view (FOV) exceeding 40° and a resolution
exceeding 0.75
line pairs per milliradian;
“Technology” for the “development” or “production” of cameras
controlled by paragraph 24;
“Technology” “required” for the “development” or “production” of
non-triaxial fluxgate “magnetometers” or non-triaxial fluxgate
“magnetometer” systems, having any of the following:
‘Sensitivity’ lower (better) than 0.05 nT (rms) per square root Hz
at frequencies of less than 1 Hz; or
‘Sensitivity’ lower (better) than 1 x 10-3 nT (rms) per square root
Hz at frequencies of 1 Hz or more.
“Technology” “required” for the “development” or “production” of
infrared up-conversion devices having all of the following: e.1. A
response in the wavelength range exceeding 700 nm but not exceeding
1500 nm; and
e.2. A combination of an infrared photodector, light emitting diode
(OLED), and nanocrystal to convert infrared light into visible
light.
TechnicalNote:Forthepurposesof 39,‘sensitivity’(ornoiselevel)isthe
root mean square of the device-limitednoisefloorwhichisthe
lowestsignalthatcanbemeasured. |
8517693000
8517694000
8526919090
9014109000
9014200000 |
Other navigation direction finding equipment, airborne communication
equipment, all aircraft inertial navigation systems not controlled
under 7A003 or 7A103, and other avionic equipment, including “parts”
and “components,” |
|
9030820000 |
Other equipment for the test, inspection, or “production” of
navigation and avionics equipment. |
|
ㅡ |
“Software”, , for the “development”, “production”, or “use” of
navigation, airborne communication and other avionics. |
|
ㅡ |
“Technology,” , for the “development,” “production” or “use” of
navigation, airborne communication, and other avionics equipment. |
9006300000
9006300000
9029201010
9029201090
9029202000
9006300000
8479899099
8481801090
8901100000
8901200000
8901300000
8901901000
8901902000
8902002090
8903210000
8903220000
8903230000
8903310000
8903320000
8903330000
8903939000
8903999000
8904009000
10-0000
8905909000
10-0000
8906900000
8908009000
10-0000
21-0000
8407290000
8408103000 |
Vessels, marine systems or equipment, and “specially designed”
“parts” and “components” therefor, and marine boilers and “parts,”
“components,” “accessories,” and
“attachments” therefor
Underwater vision systems, as follows:
Television systems (comprising camera, lights, monitoring and signal
transmission equipment) having a limiting resolution when measured
in air of more than 500 lines and
“specially designed” or modified for remote operation with a
submersible vehicle; or
Underwater television cameras having a limiting resolution when
measured in air of more than 700
lines;
Technical Note: Limiting resolution in television is a measure of
horizontal resolution usually expressedintermsofthemaximum number
oflines per picture height |
9506290000
9506290000
9405420000
8906900000
8414400000
8402110000
8402120000
8402191000
8402199000
8402200000
8402901000
8402902000 |
discriminatedonatestchart,using IEEE Standard 208/1960 or any
equivalentstandard.
Photographic still cameras “specially designed” or modified for
underwater use, having a film format of 35 mm or larger, and having
autofocusing or remote focusing “specially designed” for underwater
use;
Stroboscopic light systems, “specially designed” or modified for
underwater use, capable of a light output energy of more than 300 J
per
flash;
Other underwater camera
equipment, ;
Other submersible systems, ,;
Vessels, n.e.s., including inflatable boats, and “specially
designed” “parts” and “components” therefor, ;
Marine engines (both inboard and outboard) and submarine engines, ;
and “specially designed” “parts” and
“components” therefor, ;
Other self-contained underwater breathing apparatus (scuba gear) and
related equipment,
Life jackets, inflation cartridges, compasses, wetsuits, masks,
fins, weight belts, and dive computers;
Underwater lights and propulsion equipment;
Air compressors and filtration systems “specially designed” for
filling air cylinders.
Marine boilers designed to have any of the following
characteristics:
Heat release rate (at maximum rating) equal to or in excess of
190,000 BTU per hour per cubic foot of furnace volume; or
Ratio of steam generated in pounds per hour (at maximum rating) to
the dry weight of the boiler in pounds equal to or in excess of
0.83.
Major “components,” “accessories,” and “attachments” for marine
boilers described in paragraph 44.l. |
|
ㅡ |
“Software” “specially designed” or modified for the “development”,
“production” or “use” of equipment controlled by paragraph 44.. |
|
ㅡ |
“Software” “specially designed” for the operation of unmanned
submersible vehicles used in the oil and gas industry. |
|
ㅡ |
“Technology” for the “development”, “production” or “use” of
equipment controlled by paragraph 44. |
8408201000
8408202000
8408203000
8408204000
8408205000
8701951010
8701951020
8701952000
8701959000
8701951010
8701951020
8701952000
8701959000 |
Diesel engines,, and tractors and
“specially designed” “parts” and
“components” therefor,
Diesel engines,, for trucks, tractors, and automotive applications
of continuous brake horsepower of 400 BHP (298 kW) or greater
(performance based on SAE J1349 standard
conditions of 100 Kpa and 25°)
Off highway wheel tractors of carriage capacity 9 mt (20,000 lbs) or
more; and major “components” and
“accessories,”
c. On-Highway tractors, with single or tandem rear axles rated for 9
mt per axel (20,000 lbs.) or greater and “specially designed” major
“components”. “Aircraft”, n.e.s., and gas turbine engines and
“parts” and
“components,” |
8802111000
8802121000
8802201000
8802202000 |
Military aircraft, demilitarized (not specifically equipped or
modified for military operation), as follows:
Cargo aircraft bearing “C” designations and numbered C-45 through
C-118 inclusive, C-121 through C-125 inclusive, and C-131, using
reciprocating engines only.
Trainer aircraft bearing “T” designations and using reciprocating
engines or turboprop engines with less than 600 horsepower (s.h.p.).
Utility aircraft bearing “U” designations and using reciprocating
engines only.
All liaison aircraft bearing an “L” designation.
a.5 All observation aircraft bearing “O” designations and using
reciprocating engines. |
8802111000
8802121000
8802201000
8802202000 |
b. Aircraft ; |
8411119090
8411129090
8411219090
8411229090
8411829090
8411919000 |
c. Aero gas turbine engines, and “parts” and “components” “specially
designed” therefor.
Note:paragraphcdoesnotcontrol aero gas turbine engines that are
destinedforuseincivil“aircraft”and thathavebeeninuseinbonafide civil
“aircraft” for more than eight years.Iftheyhave beeninuse in bona
fide civil “aircraft” for more than eight years, suchenginesare
controlledunder49.d. |
8807100000
8807200000
8807301000
8807909000 |
d. “Parts” and “components,”
“specially designed” for “aircraft,” |
9020001000
9020008000
9020009000 |
e. Pressurized aircraft breathing equipment, ; and “parts” and
“components” “specially designed” therefor, |
6306120000
6306190000 |
Complete canopies, harnesses, and |
9031200000
9031809091
9031809099 |
Vibration test equipment and
“specially designed” “parts” and
“components,” |
9031809080
9031809091
9031809099
8466100000
8466201000
8466209000
8466931000
8466939000
8454301010
8454301090
8454309000
8514110000
8514191000
8514192000
8514193000
8514199000
8514110000
8514191000
8514192000
8514193000
8514199000
8511109000
8511209000
8511309000
8511509000 |
“Specially designed” “equipment,” tooling or fixtures for
manufacturing or measuring gas turbine blades, vanes or tip shroud
castings, as follows:
Automated equipment using non-mechanical methods for
measuring airfoil wall thickness;
Tooling, fixtures or measuring equipment for the “laser”, water jet
or ECM/EDM hole drilling processes
controlled by 9E003.c;
Ceramic core leaching equipment;
Ceramic core manufacturing
equipment or tools;
Ceramic shell wax pattern
preparation equipment;
Ceramic shell burn out or firing equipment. |
|
ㅡ |
“Software”, , for the “development” or “production” of equipment
controlled by paragraph 48 or 51. |
|
ㅡ |
“Software”, for the “development” or “production” of equipment
controlled by paragraph 49 or 52. |
|
ㅡ |
“Technology”, , for the “development” or “production” or “use” of
equipment controlled by paragraph 48 or 51. |
|
ㅡ |
“Technology”, for the “development”, “production” or “use” of
equipment controlled by paragraph 49 or 52. |
|
ㅡ |
Other “technology”, not described by 9E003, as follows:
Rotor blade tip clearance control systems employing active
compensating casing “technology” limited to a design and development
data base; or
Gas bearing for turbine engine rotor assemblies. |
3824999090
6914909000
8481809000 |
Oil and gas exploration equipment, software, and data, as follows.
a. Oil and gas exploration data, e.g., seismic analysis data.
Hydraulic fracturing items, as follows:
Hydraulic fracturing design and analysis software and data.
Hydraulic fracturing ‘proppant,’ ‘fracking fluid,’ and chemical
additives therefor.
Technical Note: A ‘proppant’ is a solid material, typically treated
sand or man-made ceramic materials, designed to keep an induced
hydraulic fracture open, during or following a fracturing treatment.
It is added to a ‘fracking fluid’ which may vary in composition
depending on the type of fracturing used, and can be gel, foam or
slickwater-based.
High pressure pumps. |
8531809000
9030890000 |
Marine or terrestrial acoustic equipment, capable of detecting or
locating underwater objects or features or positioning surface
vessels or underwater vehicles; and “specially designed” “parts” and
“components,” |
8421399099
8525899000
8528729000 |
Vessels, marine systems or equipment, not controlled by 8A001 or
8A002 and “specially designed” “parts” and “components” therefor,
and marine boilers and “parts,” “components,” “accessories,” and
“attachments”
therefor
a. Underwater vision systems, as follows:a.1. Television systems
(comprising camera, lights, monitoring and signal transmission
equipment) having a limiting resolution when measured in air of more
than 500 lines and
“specially designed” or modified for remote operation with a
submersible vehicle; or
a.2. Underwater television cameras having a limiting resolution when
measured in air of more than 700
lines;
TechnicalNote:Limitingresolutionin televisionisameasureofhorizontal
resolutionusuallyexpressedinterms ofthemaximumnumberoflinesper
pictureheightdiscriminatedonatest chart,usingIEEEStandard208/1960
oranyequivalentstandard.
Photographic still cameras “specially designed” or modified for
underwater use, having a film format of 35 mm or larger, and having
autofocusing or remote focusing “specially designed” for underwater
use;
Stroboscopic light systems, “specially designed” or modified for
underwater use, capable of a light output energy of more than 300 J
per flash; Other underwater camera
equipment, ;
Other submersible systems, ,;
Vessels, n.e.s., including inflatable boats, and “specially
designed” “parts” and “components” therefor, ;
Marine engines (both inboard and outboard) and submarine engines, ;
and “specially designed” “parts” and
“components” therefor, ;
Other self-contained underwater breathing apparatus (scuba gear) and
related equipment, ;
Life jackets, inflation cartridges, compasses, wetsuits, masks,
fins, weight belts, and dive computers;
Underwater lights and propulsion equipment;
Air compressors and filtration systems “specially designed” for
filling air cylinders.
Marine boilers designed to have any of the following
characteristics:
l.1. Heat release rate (at maximum rating) equal to or in excess of
190,000 BTU per hour per cubic foot of furnace volume; or
l.2. Ratio of steam generated in pounds per hour (at maximum rating)
to the dry weight of the boiler in pounds equal to or in excess of
0.83.
m. Major “components,” “accessories,” and “attachments” for marine
boilers described in paragraph 60.l. |
|
ㅡ |
“Software” “specially designed” for the operation of unmanned
submersible vehicles used in the oil and gas industry. |
|
7304110000 |
Line pipe of a kind used for oil or gas pipelines, seamless, of
stainless steel |
|
7304190000 |
Line pipe of a kind used for oil or gas pipelines, seamless, of iron
(noncast) or nonalloy steel, with an outside diameter not exceeding
114.3 mm |
|
7304190000 |
Line pipe for oil or gas pipelines, seamless, iron (noncast) or
nonalloy steel, with outside diameter over 114.3 mm but not over
406.4 mm |
|
7304190000 |
Line pipe of a kind used for oil or gas pipelines, seamless, of iron
(noncast) or nonalloy steel, with an outside diameter exceeding
406.4 mm |
|
7304190000 |
Line pipe of a kind used for oil or gas pipelines, seamless, of
other alloy steel, not stainless, with an outside diameter not
exceeding 114.3 mm |
|
7304190000 |
Line pipe, used for oil or gas pipelines, seamless, of other alloy
steel, not stainless, with an outside diameter >114.3 mm, but <406.4
mm |
|
7304190000 |
Line pipe of a kind used for oil or gas pipelines, seamless, of
alloy steel, not stainless, with an outside diameter exceeding 406.4
mm |
|
7304220000 |
Oil well drill pipe, of stainless steel |
|
7304230000 |
Oil well drill pipe, of iron or nonalloy steel |
|
7304230000 |
Oil well drill pipe, of alloy steel other than stainless steel |
|
7304240000 |
Oil well casing of stainless steel |
|
7304240000 |
Oil well tubing of stainless st eel |
|
7304290000 |
Oil well casing of iron or steel nonalloy |
|
7304290000 |
Oil well casing of other alloy stainless steel not |
|
7304290000 |
Oil well tubing of iron or steel nonalloy |
|
7304290000 |
Oil well tubing of other alloy steel other than stainless steel |
|
7305111000 |
Line pipe for oil or gas, longitudinally submerged arc welded,
external diameter more |
|
7305119000 |
than 406.4 mm, circular cross-sections, of iron or nonalloy steel |
|
7305111000 7305119000 |
Line pipe for oil/gas pipelines, longitudinally submerged arc welded
with external diameter over 406.4mm, of alloy steel, with circular
cross-section |
|
7305120000 |
Line pipe for oil or gas, other longitudinally welded, external
diameter more than 406.4mm, circular cross-section, iron or nonalloy
steel |
|
7305120000 |
Line pipe for oil or gas pipelines, longitudinally welded with
external diameter >406.4 mm, of alloy steel, with circular cross
section |
|
7305190000 |
Line pipe for oil or gas other than longitudinally welded, external
diameter more than 406.4 mm, circular cross-section, iron or
nonalloy steel |
|
7305190000 |
Line pipe for oil or gas pipelines, with external diameter >406.4
mm, of alloy steel, circular cross section, welded/riveted, |
|
7305200000 |
Casing, oil or gas drilling, other than seamless, circular
cross-section, external diameter over 406.4 mm, iron or nonalloy
steel |
|
7305200000 |
Casing, oil or gas drilling, other than seamless, circular
cross-section, external diameter over 406.4 mm, iron or nonalloy
steel |
|
7306110000 |
Line pipe for oil or gas of stainless steel not seamless |
|
7306190000 |
Line pipe for oil or gas of iron or nonalloy steel not seamless |
|
7306190000 |
Line pipe for oil or gas not seamless
of alloy steel other than stainless steel |
|
7311001000 7311002000, 7311003000 |
Containers for compressed or liquefied gas of iron or steel |
|
7613001000 7613002000 |
Aluminum containers for compressed or liquefied gas |
|
8207130000 |
Rock drilling or earth boring tools with working part of cermets,
and parts thereof |
|
8207191000 |
Percussion rock drill bits, core bits and reamers, of base metal,
and parts thereof |
|
8207191000 |
Rotary rock drill bits, core bits and reamers of base metal, and
parts thereof |
|
8207191000 |
Rock drilling or earth boring tools of base metals, and parts
thereof |
|
8413509010 8413509020, 8413509030, 8413509090 |
Oil well and oil field pumps, reciprocating positive displacement |
|
8413609010, 8413609020, 8413609030, 8413609090 |
Oil well and oil field pumps, rotary positive displacement |
|
8413820000 |
Liquid elevators |
|
8413920000 |
Parts of liquid elevators |
|
8421399011, 8421399019 8421399021, 8421399029, 8421399091 8421399099 |
Electrostatic precipitators, industrial gas cleaning equipment |
|
8421399011, 8421399019, 8421399021 8421399029, 8421399091,
8421399099 |
Industrial gas cleaning equipment |
|
8421391000, 8421392000, 8421399011, 8421399019, 8421399021,
8421399029, 8421399030, 8421399091, 8421399099 |
Gas separation equipment |
|
8430491000 8430499000 |
Offshore oil and natural gas drilling and production platforms |
|
8430491000, 8430499000 |
Boring or sinking machinery, rotary, for oil well and gas field
drilling |
|
8430491000, 8430499000 |
Boring or sinking machinery for oil well and gas field drilling |
|
8431390000 |
Parts suitable for use solely or principally with the oil and gas
field machinery of headings 8425 to 8430 |
|
8431430000 |
Offshore oil and natural gas drilling and production platform parts,
of subheading 8430.41 or 8430.49 |
|
8431430000 |
Parts of oil and gas field machinery of subheading 8430.49 except
parts of offshore drilling and production platforms |
|
8431430000 |
Parts of boring or sinking machinery of subheading 8430.41 or
8430.49, |
|
8479899099 |
Oil and gas field wire line and downhole equipment |
|
8705200000 |
Mobile drilling derricks |
|
8708991010 |
Parts and accessories, for motor vehicles of heading 8705.20 |
|
8905201000, 8905202000, 8905209000, |
Floating or submersible drilling or production platforms |
|
8905908000 |
Floating docks |
|
3926909000 |
PARTS FOR YACHTS OR PLEASURE BOATS, ETC |
|
7102100000 |
DIAMONDS, UNSORTED |
|
7103911000, 7103919010, 7103919020, 7103919030 |
RUBIES, SAPPHIRES AND EMERALDS, OTHERWISE WORKED |
|
8407210000 |
OUTBOARD ENGINES FOR MARINE PROPULSION, AND VALUED EXCEEDING $750 |
|
8407290000 |
SPK-IGN REC OR ROT INT COM PST ENG, MAR, IN/OUTBOARD, AND VALUED
EXCEEDING $750 |
|
8407290000 |
INBOARD ENG WITH INBOARD DRIVE F MARINE PROPULSION, AND VALUED
EXCEEDING $750 |
|
8408101000 |
DIESEL ENGINES, NOT EXCEEDING 149.2 KW, MARINE, AND VALUED EXCEEDING
$750 |
|
8408101000 |
COMP-IGNI PST ENG, MARINE, EXC 149.2KW, NOT EXC 223.8KW, AND VALUED
EXCEEDING $750 |
|
8409912000, 8409919000 |
PARTS F SPARK IG ENG FOR MARINE PROPULSION, AND VALUED EXCEEDING
$750 |
|
8412290000 |
HYDROJET ENGINES FOR MARINE PROPULSION, AND VALUED EXCEEDING $750 |
|
8412902000, 8412909000 |
PARTS OF HYDROJET ENGINES FOR MARINE PROPULSION, AND VALUED
EXCEEDING $750 |
|
8471300000 |
PORT DGTL ADP MACH, < 10 KG, AT LEAST CPU, KBRD, DSPLY, AND VALUED
EXCEEDING $750 |
|
8703101000 |
VEHICLES DESIGNED TRAVELING ON SNOW, VALUED EXCEEDING FOR AND
$50,000 |
|
8703217000, 8703218000 |
PASS MTR VEH, ONLY SPARK IGN ENG, NOT OV 1,000 CC, AND VALUED
EXCEEDING $50,000 |
|
8703227000, 8703228000 |
PASS MOTOR VEH, ONLY SPARK IGN ENG, (1000-1500 CC), AND VALUED
EXCEEDING $50,000 |
|
8703231010, 8703239010 |
VEHICLES, NEW, ENG (150 0 ㅡ 3000 VALUED CC) LE 4CYL, AND EXCEEDING
$50,000 |
|
8703231010, 8703239010 |
PASS VEH, OV 4 N/O 6
CYL,1500-3000CC, AND VALUED
EXCEEDING $50,000 |
|
8703231010, 8703239010 |
3PASS VEH, SPARK IGN, >6 CYL,
1500-3000CC, AND VALUED
EXCEEDING $50,000 |
|
8703231020, 8703239020 |
USED VEHICLES, ONLY SK IG (1500-3000 CC), AND VALUED EXCEEDING
$50,000 |
|
8703241010, 8703249010 |
PASS VEH, SPK IGN>3000CC, 4 CYL & UN, AND VALUED EXCEEDING $50,000 |
|
8703241010, 8703249010 |
PASS VEH, ONLY SPK IGN OV 4 N/O 6 CYL, OV 3000 CC, AND VALUED
EXCEEDING $50,000 |
|
8703241010, 8703249010 |
PASS VEH, ONLY SPK IGN >6 CYL,>3000CC, NEW, AND VALUED EXCEEDING
$50,000 |
|
8703241020, 8703249020 |
PASS MTR VEH, ONLY SPARK IGN, GT 3000 CC, USED, AND VALUED EXCEEDING
$50,000 |
|
8703317000, 8703318000 |
PASS VEH, ONLY COMPR IG, DIESEL, < 1,500 CC, AND VALUED EXCEEDING
$50,000 |
|
8703321010, 8703329010 |
PASS VEH, DIESEL ENG, ONLY CMP-IG,1500- 2500 CC, NEW, AND VALUED
EXCEEDING $50,000 |
|
8703321020, 8703329020 |
PASS VEH, DIESEL ENG, ONLY COMP-IG1500- 2500 CC, USED, AND VALUED
EXCEEDING $50,000 |
|
8703337000 |
PASS VEH, DIESEL, ONLY COMP-IG, > 2,500 CC, NEW, AND VALUED
EXCEEDING $50,000 |
|
8703338000 |
PASS VEH, DIESEL, ONLY COMP-IG, > 2,500 CC, USE, VALUED EXCEEDING
$50,000 |
|
8703401000, 8703402000 |
PASS MOT VEH LT=1000CC SPRK
IGN/ELEC NCHRG ENG, AND
VALUED EXCEEDING $50,00 |
|
8703401000, 8703402000 |
PSSNGR VEH, SPARK IGN AND
ELCTC MTR, 1000-1500 CC, AND
VALUED EXCEEDING $50,000 |
|
8703401000 |
PASS VEH, SPRK IG/ELEC, NCHG, 4
CYL, 500-3000CC, AND VALUED
EXCEEDING $50,00 |
|
8703401000 |
PASS VEH SPK IGN/ELEC, NCHG
PL >4<6 CYL,1500-3000CC, AND
VALUED EXCEEDING $50,00 |
|
8703401000 |
3PASS VEH, SPARK IGN/ELEC, NCHRG>6 CYL,1500-3000CC, AND VALUED
EXCEEDING $50,000 |
|
8703402000 |
USED VHCLS, SPRK AND ELCTC ENGN 1500- 3000 CC AND VALUED EXCEEDING
$50,000 |
|
8703401000 |
PASS VEH, SPK IGN/ELEC NCHG PLG>3000CC,4 CYL & UN, AND VALUED
EXCEEDING $50,000 |
|
8703401000, 8703402000 |
PASS VEH, SPK IGN/ELEC NCHG PLUG>4<6 CYL,>3000 CC, AND VALUED
EXCEEDING $50,000 |
|
8703401000 |
PASS VEH, SPK IGN/ELEC, NWCHRG PLG>6 CYL,>3000 CC, AND VALUED
EXCEEDING $50,000 |
|
8703402000 |
PASS VEH, SPK IG & ELEC NO PLUG, OVER 3000 CC, USED, AND VALUED
EXCEEDING $50,000 |
|
8703501000, 8703502000 |
PASS VEH, DIESEL AND ELEC NO
PLUG, < 1,500 CC, AND VALUED
EXCEEDING $50,00 |
|
8703501000 |
PASS VEH, DIESL/ELC (NO PLUG)
1500-2500 CC, NEW, AND VALUED
EXCEEDING $50,000 |
|
8703502000 |
PASS VEH, DIES/ELEC (NO PLG) ENG, 1500- 2500 CC, USED, AND VALUED
EXCEEDING $50,000 |
|
8703501000 |
PASS VEH, DIESEL/ELEC, > 2,500 CC, NEW, AND VALUED EXCEEDING $50,000 |
|
8703502000 |
PASS VEH, DIESEL/ELEC, > 2,500
CC, USED, AND VALUED
EXCEEDING $50,000 |
|
8703601000, 8703602000 |
PASS MOT VEH LT=1000 CC SPARK IGN /ELEC CHRG W PLG, AND VALUED
EXCEEDING $50,000 |
|
8703601000 |
PASSVEH, SP-IGN/ELEC W/PLUG
ENG, (1000- 1500 CC), AND
VALUED EXCEEDING $50,00 |
|
8703601000 |
PASS VEH, SPK IGN/ELEC, WITH
PLUG 4 CYL,1500-3000CC, AND
VALUED EXCEEDING $50,000 |
|
8703601000 |
PASS VEH, SPK IGN/ELEC CHRG
PLG>4<6CYL,1500-3000CC, AND
VALUED EXCEEDING $50,000 |
|
8703601000 |
3PASS VEH, SPRK IGN/ELEC
CHRG,>6 CYL,1500-3000CC, AND
VALUED EXCEEDING $50,000 |
|
8703602000 |
USED VEHICLES, SPK/ELEC (1500-3000 CC), , AND VALUED EXCEEDING
$50,000 |
|
8703601000 |
PASS VEH, SPK IGN/ELEC CHRG
PLUG>3000CC,4 CYL & UN, AND
VALUED EXCEEDING $50,00 |
|
8703601000 |
PASS VEH, SPK IGN/ELEC, CHRG
PLUG >4<6 CYL,>3000CC, AND
VALUED EXCEEDING $50,000 |
|
8703601000 |
PASS VEH, SPK IGN/ELEC CHRG
PLUG>6 CYL,>3000 CC, AND
VALUED EXCEEDING $50,000 |
|
8703602000 |
PASS MTR VEH, SP IGN/ELEC,
OVER 3000 CC, USED, AND
VALUED EXCEEDING $50,000 |
|
8703701000, 8703702000 |
PASSENGER VEHICLES,
DIESEL/ELEC, < 1,500 CC, AND
VALUED EXCEEDING $50,000 |
|
8703701000 |
PASS VEH, DIESE/ELEC, OV 1500 BT NT OV 2500 CC, NEW, AND VALUED
EXCEEDING $50,000 |
|
8703702000 |
PASS VEH, DIESL/ELEC, OV 1500 BT NT OV 2500 CC, USED, AND VALUED
EXCEEDING $50,000 |
|
8703701000 |
PASS MOTOR VEH, DIESL/ELECTRIC,> 2,500CC, NEW, AND VALUED EXCEEDING
$50,000 |
|
8703702000 |
PASS MOTOR VEH, DIESL/ELECTRI,> 2,500 CC, USED, AND VALUED EXCEEDING
$50,000 |
|
8703801000, 8703802000 |
PASSENGER MOTOR VEHICLES ONLY ELECTRC MOTOR, AND VALUED EXCEEDING
$50,000 |
|
8703900000 |
PASSENGER MOTOR VEHICLES, AND VALUED EXCEEDING $50,000 |
|
8706003000 |
CHASSIS FITTED W/ ENG, FOR PASSENGER AUTOMOBILES, AND VALUED
EXCEEDING $50,000 |
|
8707100000 |
BODIES FOR PASSENGER AUTOS
OF HEADING 8703, AND VALUED
EXCEEDING $50, |
|
9020001000, 9020008000 |
UNDERWATER BREATHING
DEVICES CARRIED ON PERSON AND VALUED EXCEEDING $30 |
8424209000
8424899000
8424901000
8424902000
8424909090
8705909090 |
Water cannon systems for riot or crowd control, and “parts” and
“components” “specially designed” therefor. |
6602009000
9304009000 |
Law enforcement striking weapons, including saps, police batons,
side handle batons, tonfas, sjamboks, and whips. |
3926909000
6506910000
6506990000 |
Police helmets and shields; and
“specially designed” “components,” |
8303009000
9018398000
9401800000 |
Equipment designed for the execution of human beings as follows. a.
Gallows and guillotines
Electric chairs for the purpose of executing human beings
Air tight vaults designed for the execution of human beings by the
administration of a lethal gas or substance
Automatic drug injection systems designed for the execution of human
beings by administration of a lethal substance. |
4203309000
8301409000 |
Law enforcement restraint devices, including leg irons, shackles,
and |
|
9401800000 |
handcuffs; straight jackets; stun cuffs; shock belts; shock sleeves;
multipoint restraint devices such as restraint chairs; and
“specially designed” “parts,” “components” and
“accessories,” |
8479899099
8479909090
9304009000 |
“Specially designed” implements of torture, including thumbscrews,
thumbcuffs, fingercuffs, spiked batons, and “specially designed”
“parts,”
“components” and “accessories,” |
8430411000
8430412000
8430491000
8430499000
8430500000
8430610000
8430690000 |
Oil and gas exploration equipment, software, and data, as follows
(see Paragraph 58 of Items Controlled). |
8505191000
8505199000
8505901010
8505901090
8505902000
8505903000
8505909000 |
Specific processing equipment, as follows
a. Ring Magnets; |
|
9406909000 |
Specific processing equipment, as follows.
Hot cells;
Glove boxes suitable for use with radioactive materials. |
|
ㅡ |
“Software” “specially designed” for the “development,” “production”
or “use” of commodities, as follow.
a. Water cannon systems for riot or crowd
control, and “parts” and “components” “specially designed” therefor. |
|
ㅡ |
Specific software, as follows.
Software for neutronic
calculations/modeling;
Software for radiation transport
calculations/modeling;
Software for hydrodynamic calculations/modeling. |
|
ㅡ |
“Technology” ‘‘required’’ for the ‘‘development’’ or ‘‘production’’
of commodities controlled by paragraph
177. |
|
ㅡ |
“Technology” exclusively for the “development” or “production” of
equipment, as follow
Law enforcement restraint devices, including leg irons, shackles,
and handcuffs; straight jackets; stun cuffs; shock belts; shock
sleeves; multipoint restraint devices such as restraint chairs; and
“specially designed” “parts,” “components” and
“accessories,”
Discharge type arms; non-lethal or lesslethal grenades and
projectiles, and “specially designed” “parts” and “components” of
those projectiles; and devices to administer electric shock, for
example, stun guns, shock batons, shock shields, electric cattle
prods, immobilization guns and projectiles; except equipment used to
slaughter domestic animals or used exclusively to treat or
tranquilize animals, and except arms designed solely for signal,
flare, or saluting use; and “specially designed” “parts” and
“components,” |
|
ㅡ |
Chemical agents, including tear gas formulation containing 1 percent
or less of orthochlorobenzalmalononitrile
(CS), or 1 percent or less of chloroacetophenone (CN), except in
individual containers with a net weight of 20 grams or less; |
9304009000
9306900000 |
liquid pepper except when packaged in individual containers with a
net weight of 3 ounces (85.05 grams) or less; smoke bombs;
non-irritant smoke
flares, canisters, grenades and charges; |
9306210000
9306290000
9306301000
9306309000 |
and other pyrotechnic articles (excluding shotgun shells, unless the
shotgun shells contain only chemical irritants) having dual military
and commercial use, and “parts” and “components” “specially
designed” therefor, |
3204909000
3215909000
7603100000
7603201000 |
Fingerprinting powders, dyes, and inks. |
|
ㅡ |
Protective and detection equipment not “specially designed” for
military use and not controlled by 1A004 or 2B351, as follows, and
“parts” and
“components” not “specially designed” for military use and not
controlled by 1A004 or 2B351 therefor. |
9022299000
9030399000
9030890000 |
a. Personal radiation monitoring dosimeters; |
8421219090
8421291000
8421292010
8421292090
8421299090
8421399099
8421999021
8421999029
8421999091
8421999099 |
b. Equipment limited by design or function to protect against
hazards specific to civil industries, such as mining, quarrying,
agriculture, pharmaceuticals, medical, veterinary, environmental,
waste management, or to the food industry.
Note: This entry does not control items for protection against
chemical or biological agents that are consumer goods, packaged for
retail sale or personal use, or medical products, such as latex exam
gloves, latex surgical gloves, liquid disinfectant soap, disposable
surgical drapes, surgical gowns, surgical foot covers, and surgical
masks. |
|
ㅡ |
Specific processing equipment,, as follows |
9022291000
9022292000
9022299000 |
a. Radiation detection, monitoring and measurement equipment,; |
9022191000
9022192000
9022199000
9022291000
9022292000
9022299000 |
b. Radiographic detection equipment such as xray converters, and
storage phosphor image plates. |
|
ㅡ |
Specific processing equipment,, as follows |
8543301000
8543309000
8543909000 |
a. Electrolytic cells for fluorine production,; |
8543100000
8543909000 |
b. Particle accelerators; |
5407101000
5407102000
5407200000 |
Fibrous and filamentary materials, not controlled by 1C010 or 1C210,
for use in “composite” structures and with a specific modulus of
3.18 x 106 m
or greater and a specific tensile strength of 7.62 x 104 m
or greater. |
|
ㅡ |
Related Definitions: For the purpose of this entry, “immunotoxin” is
defined as an antibody-toxin conjugate intended to destroy specific
target cells (e.g., tumor cells) that bear antigens homologous to
the antibody. For the purpose of this entry, “medical products” are: |
|
ㅡ |
(1) pharmaceutical formulations designed for testing and human
administration in the treatment of
medical conditions, |
|
ㅡ |
(2) prepackaged for distribution as clinical or medical products,
and |
|
ㅡ |
(3) approved by the Food and Drug Administration either to be
marketed as clinical or medical products or for use as an
“Investigational New Drug” (IND). For the purpose of this entry,
“diagnostic and food testing kits” are specifically developed,
packaged and marketed for diagnostic or public health purposes.
Biological toxins in any other configuration, including bulk
shipments, or for any other end-uses are controlled by 1C351. For
the purpose of this entry, “vaccine” is defined as a medicinal (or
veterinary) product in a pharmaceutical formulation, approved by the
Korea Food and Drug Administration to be marketed as a medical (or
veterinary) product or for use in clinical trials, that is intended
to stimulate a protective immunological response in humans or
animals in order to prevent disease in those to whom or to which it
is administered. |
|
3002410000 |
a. Vaccines against items controlled by 1C351, 1C353 or 1C354; |
3006922010
3006922090
3006924000 |
c. Medical products containing botulinum toxins controlled by
1C351.d.3 or conotoxins controlled by
1C351.d.6; |
3006922010
3006922090
3006924000 |
d. Medical products containing items controlled by 1C351.d (except
botulinum toxins controlled by 1C351.d.3, conotoxins controlled by
1C351.d.6, and items controlled for CW reasons under
1C351.d.11 or .d.12); |
8479899099
9031809099 |
e. Diagnostic and food testing kits containing items controlled by
1C351.d (except items controlled for CW reasons under 1C351.d.11 or
.d.12). |
|
ㅡ |
Commercial charges and devices containing energetic materials, and
nitrogen trifluoride in a gaseous state |
3601001000
3601002000
3602000000 |
a. Shaped charges “specially designed” for oil well operations,
utilizing one charge functioning along a single axis, that upon
detonation produce a hole, and |
|
ㅡ |
a.1. Contain any formulation of
controlled materials; |
|
ㅡ |
a.2. Have only a uniform shaped conical liner with an included angle
of 90 degrees or less; |
|
ㅡ |
a.3. Contain more than 0.010 kg but less than or equal to 0.090 kg
of
controlled materials; and |
|
ㅡ |
a.4. Have a diameter not exceeding 4.5 inches; |
3601001000
3601002000
3602000000 |
b. Shaped charges “specially designed” for oil well operations
containing less than or equal to 0.010 kg of controlled materials; |
9306301000
9306309000
9306900000 |
c. Detonation cord or shock tubes containing less than or equal to
0.064 kg per meter (300 grains per foot) of
controlled materials; |
9306301000
9306309000
9306900000 |
g. Oil well cartridges, that contain less than or equal to 0.015 kg
of controlled energetic materials; |
9306301000
9306309000
9306900000 |
h. Commercial cast or pressed boosters containing less than or equal
to 1.0 kg of controlled materials; |
9306301000
9306309000
9306900000 |
i. Commercial prefabricated slurries and emulsions containing less
than or equal to 10.0 kg and less than or equal to thirty-five
percent by weight of controlled materials; |
|
8205903000 |
j. Cutters and severing tools |
8205909000
8456111000
8456119000
8456200000
8456301010
8456301090
8456400000
8456500000
8456900000 |
containing less than or equal to 3.5 kg of controlled materials; |
3604100000
3604909000 |
k. Pyrotechnic devices when designed exclusively for commercial
purposes (e.g., theatrical stages, motion picture special effects,
and fireworks displays) and containing less than or equal to
3.0 kg of controlled materials; or |
3601001000
3601002000
3602000000 |
l. Other commercial explosive devices and charges not controlled by
197.a through .k containing less than or equal to 1.0 kg of
controlled materials. Note: 197.l includes automotive safety
devices; extinguishing systems; cartridges for riveting guns;
explosive charges for agricultural, oil and gas operations, sporting
goods, commercial mining, or public works purposes; and delay tubes
used in the assembly of commercial explosive devices. |
|
2812909000 |
m. Nitrogen trifluoride (NF3) in a gaseous state. |
|
ㅡ |
Mixtures not controlled by 1C350 that contain chemicals controlled
by 1C350 and medical, analytical, diagnostic, and food testing kits
not controlled by 1C350 that contain chemicals controlled by
1C350.d, as follows |
|
ㅡ |
1. This paragraph does not control mixtures containing less than
0.5% of any single toxic or precursor chemical controlled by 1C350
as unavoidable by-products or impurities. |
|
ㅡ |
2. 198.b does not control mixtures that contain precursor chemicals
identified in 1C350.d in concentrations below the levels for
mixtures indicated in 1C350 198.a.2.b controls such mixtures, unless
they are consumer goods as described in License Requirements Note 3
of this . |
|
ㅡ |
3. This paragraph does not control mixtures when the controlled
chemicals are normal ingredients in consumer goods packaged for
retail sale for personal use. |
|
ㅡ |
4. 1C350 controls mixtures containing 30 percent or higher
concentrations of any single CWC Schedule 2 chemical. |
|
ㅡ |
5. 1C350 controls mixtures containing chemicals identified in 1C350
that exceed the concentration levels indicated in 198.a.2. |
|
ㅡ |
6. This paragraph controls “medical, analytical, diagnostic, and
food testing kits” (as defined in the Related Controls paragraph of
this paragraph) that contain CWC Schedule 2 or 3 chemicals listed in
1C350. 1C350 controls any such testing kits in which the amount of
any single chemical exceeds 300 grams by weight. |
|
ㅡ |
Related Definitions: For the purpose of this entry, “medical,
analytical, diagnostic, and food testing kits” are pre-packaged
materials of defined composition that are specifically developed,
packaged and marketed for medical, analytical, diagnostic, or public
health purposes. Replacement reagents for medical, analytical,
diagnostic, and food testing kits described in 198.c are controlled
by 1C350 if the reagents contain at least one of the precursor
chemicals identified in that control list in concentrations equal to
or greater than the control levels for mixtures indicated in 1C350. |
2825901090
2825902090
2853909000
3824999090 |
a. Mixtures containing the following concentrations of precursor
chemicals controlled by 1C350 (For controls on other mixtures
containing these chemicals, see Notes 1 and 2 in the
Related Controls paragraph of this): |
|
ㅡ |
a.1. Mixtures containing 10 percent or less, by weight, of any
single CWC Schedule 2 chemical controlled by
1C350; |
|
ㅡ |
a.2. Mixtures containing less than 30 percent, by weight, of: |
|
ㅡ |
a.2.a. Any single CWC Schedule 3
chemical controlled by 1C350; or |
|
ㅡ |
a.2.b. Any single precursor chemical controlled by 1C350. |
2825901090
2825902090
2853909000
3824999090 |
b. “Medical, analytical, diagnostic, and food testing kits” (as
defined in the Related Definitions for this) that contain precursor
chemicals controlled by 1C350 in an amount not exceeding 300 grams
per chemical. (For controls on other such test kits containing these
and other controlled chemicals, see Note 4 in the Related Controls
paragraph of this.) |
2710197900
2710999000 |
Hydraulic fluids containing synthetic hydrocarbon oils, not
controlled by 1C006, having all the following characteristics |
|
ㅡ |
Ammonium nitrate, including and fertilizer blends contai
than 15% by weight
nitrate, except liquid (containing any amount of nitrate) or dry
fertilizers
less than 15% by weight nitrate. |
|
ㅡ |
Non-fluorinated polymeric substances, not controlled by 1C008, as
follows |
3907991000
3907992000
3907999000 |
a. Polyarylene ether ketones, as follows: |
|
ㅡ |
a.1 Polyether ether ketone (PEEK); |
|
ㅡ |
a.2. Polyether ketone ketone (PEKK); |
|
ㅡ |
a.3. Polyether ketone (PEK); |
|
ㅡ |
a.4. Polyether ketone ether ketone ketone (PEKEKK); |
|
ㅡ |
Specific materials,, as follows |
8482102000
8482109000
8482800000
8482910000
8482990000 |
a. Hardened steel and tungsten carbide precision ball bearings (3mm
or
greater diameter); |
7219211010
7219211090
7219219000 |
b. 304 and 316 stainless steel plate; |
7409401010
7409401090
7409402010 |
c. Monel plate; |
2919901090
2919902000
2919909000 |
d. Tributyl phosphate; |
2808001010
2808001090 |
e. Nitric acid in concentrations of 20 weight percent or greater; |
2826191000
2826193010
2931904000 |
f. Fluorine; |
2844101000
2844102000
2844109000 |
g. Alpha-emitting radionuclides, |
|
ㅡ |
Specific software,, as follows |
|
ㅡ |
a. “Software” “specially designed” for industrial process control
hardware/systems controlled by 194,; |
|
ㅡ |
b. “Software” “specially designed” for equipment for the production
of structural composites, fibers, prepregs and preforms controlled
by 194, |
|
ㅡ |
“Technology” for the “development”, “production”, or “use” of
fibrous and filamentary materials controlled by
195. |
|
ㅡ |
Explosives or detonator detection equipment, both bulk and trace
based, consisting of an automated device, or combination of devices
for automated decision making to detect the presence of different
types of explosives, explosive residue, or detonators; and “parts”
and “components,”
Note: Explosives or detonation detection equipment in this paragraph
includes equipment for screening people, documents, baggage, other
personal effects, cargo and/or mail. |
9022199000
9022299000
9022901090
9022909010 |
a. Explosives detection equipment for automated decision making to
detect and identify bulk explosives utilizing, but not limited to,
x-ray (e.g., |
9022909090
8479899099 |
computed tomography, dual energy, or coherent scattering), nuclear
(e.g., thermal neutron analysis, pulse fast neutron analysis, pulse
fast neutron transmission spectroscopy, and gamma resonance
absorption), or electromagnetic techniques (e.g., quadropole
resonance and dielectrometry). |
9022199000
9022299000
9022901090
9022909010
9022909090
8479899099 |
c. Detonator detection equipment for automated decision making to
detect and identify initiation devices (e.g. detonators, blasting
caps) utilizing, but not limited to, x-ray (e.g. dual energy or
computed tomography) or electromagnetic techniques. |
9030396000
9030399000
9030890000
9030909000 |
Concealed object detection equipment operating in the frequency
range from
30 GHz to 3000 GHz and having a spatial resolution of 0.1
milliradian up to and including 1 milliradian at a standoff distance
of 100 meters; and “parts” and “components,”
Note: Concealed object detection equipment
includes but is not limited to equipment for screening people,
documents, baggage, other personal effects, cargo and/or mail.
Technical Note: The range of frequencies span what is generally
considered as the millimeter-wave, submillimeter-wave and terahertz
frequency regions. |
|
ㅡ |
Bearings and bearing systems not controlled by 2A001 |
8482102000
8482109000
8482800000
8482910000
8482990000 |
a. Ball bearings or Solid ball bearings, having tolerances specified
by the manufacturer in accordance with ABEC 7, ABEC 7P, or ABEC 7T
or ISO Standard Class 4 or better (or equivalents) and having any of
the following characteristics. |
|
ㅡ |
a.2. With lubricating elements or “part” or “component”
modifications that, according to the manufacturer's specifications,
are “specially designed” to enable the bearings to operate at speeds
exceeding 2.3 million DN. |
8482200000
8482300000
8482400000
8482500000
8482800000
8482910000
8482990000 |
b. Solid tapered roller bearings, having tolerances specified by the
manufacturer in accordance with ANSI/AFBMA Class 00 (inch) or
Class A (metric) or better (or equivalents) and having either of the
following characteristics. |
|
ㅡ |
b.1. With lubricating elements or “part” or “component”
modifications that, according to the manufacturer's specifications,
are “specially designed” to enable the bearings to operate at speeds
exceeding 2.3 million DN; or |
|
ㅡ |
b.2. Manufactured for use at operating temperatures below 219 K (-54
°C) or above 423 K (150 °C). |
8482102000
8482109000
8482200000
8482300000
8482400000
8482500000
8482800000
8482910000
8482990000 |
e. Fabric-lined self-aligning or fabric-lined journal sliding
bearings manufactured for use at operating temperatures below 219
K(-54 °C) or above 423 K (150 °C). |
|
ㅡ |
Piping, fittings and valves made of, or lined with stainless,
copper-nickel alloy or other alloy steel containing 10% or more
nickel and/or chromium. |
7306401000
7306909000
7307290000 |
a. Pressure tube, pipe, and fittings of
200 mm (8 in.) or more inside diameter, and suitable for operation
at pressures of 3.4 MPa (500 psi) or greater; |
8481100000
8481201000
8481202000
8481300000
8481400000
8481801010
8481801020
8481801030
8481801090
8481900000 |
b. Pipe valves having all of the following characteristics that are
not controlled by 2B350.g: |
|
ㅡ |
b.1. A pipe size connection of 200 mm (8 in.) or more inside
diameter; and |
|
ㅡ |
b.2. Rated at 10.3 MPa (1,500 psi) or more. |
|
ㅡ |
Pumps designed to move metals by electromagnetic forces. |
|
ㅡ |
Portable electric generators “specially designed” “parts” |
8501332000
8501342000
8503002090 |
“components.” |
|
ㅡ |
Specific processing equipment,, as follows |
8481100000
8481201000
8481202000
8481300000
8481400000
8481801010
8481801020
8481801030
8481801090
8481900000 |
a. Bellows sealed valves; |
|
ㅡ |
Numerical control units for machine tools and “numerically
controlled” machine tools, |
8456111000
8456119000
8456301010
8456301090
8456309000
8459211000
8459219000
8459310000
8459390000
8459411000
8459412000
8459419000
8459490000
8459510000
8459590000
8459611000
8459612000
8459619000 |
“Numerical control” units for machine tools:
Having four interpolating axes that can be coordinated
simultaneously for “contouring control”; or
Having two or more axes that can be coordinated simultaneously for
“contouring control” and a minimum programmable increment better
(less) than 0.001 mm;
“Numerical control” units for machine tools having two, three or
four interpolating axes that can be coordinated simultaneously for
“contouring control”, and capable of receiving directly (on-line)
and processing computer-aided-design (CAD) data for internal
preparation of machine instructions; or |
8537105010
8537105020
8537105090
8537204000 |
b. “Motion control boards” “specially designed” for machine tools
and having any of the following characteristics: |
|
ㅡ |
b.1. Interpolation in more than four axes; |
|
ㅡ |
b.2. Capable of “real-time processing” of data to modify tool path,
feed rate and spindle data, during the machining operation, by any
of the following: |
|
ㅡ |
b.2.a. Automatic calculation and modification of part program data
for machining in two or more axes by means of measuring cycles and
access
to source data; or |
|
ㅡ |
b.2.b. “Adaptive control” with more than one physical variable
measured and processed by means of a computing model (strategy) to
change one or more machining instructions to optimize the process. |
|
ㅡ |
b.3. Capable of receiving and processing CAD data for internal
preparation of machine instructions; or |
8456111000
8456119000
8456301010
8456301090
8456309000
8459211000
8459219000
8459310000
8459390000
8459411000
8459412000 |
c. “Numerically controlled” machine tools that, according to the
manufacturer's technical specifications, can be equipped with
electronic devices for simultaneous “contouring control” in two or
more axes and that have both of the following characteristics: |
|
ㅡ |
c.2. Positioning accuracies according to ISO 230/2 (2006), with all
compensations available: |
|
ㅡ |
c.2.a. Better than 15 µm along any linear axis (overall positioning)
for grinding machines; |
8460120000
8460190000
8460220000
8460230000
8460241000
8460242000
8460249000
8460291000
8460292000
8460293000
8460294000
8460299000
8460310000
8460390000, 8460401000
8460402000
8460900000 |
d. Machine tools, as follows, for removing or cutting metals,
ceramics or composites, that, according to the manufacturer's
technical specifications, can be equipped with electronic devices
for simultaneous “contouring control” in two or more axes: |
|
ㅡ |
d.1. Machine tools for turning, grinding, milling or any combination
thereof, having two or more axes that can be coordinated
simultaneously for “contouring control” and having any of the
following characteristics: |
|
ㅡ |
d.1.a. One or more contouring “tilting spindles”; |
|
ㅡ |
d.1.c. “Run out” (out-of-true running) in one revolution of the
spindle less (better) than 0.0006 mm total indicator reading (TIR); |
|
ㅡ |
d.1.d. The “positioning accuracies”, with all compensations
available, are less (better) than: 0.001° on any rotary axis; |
|
ㅡ |
d.2. Electrical discharge machines (EDM) of the wire feed type that
have five or more axes that can be coordinated simultaneously for
“contouring control”. |
|
ㅡ |
Non-"numerically controlled” machine tools for generating optical
quality surfaces, (see List of Items Controlled) and “specially
designed” “parts” and “components” therefor. |
8458110000
8458190000
8458910000
8458990000
8466939000
8466940000 |
a. Turning machines using a single point cutting tool and having all
of the following characteristics: |
|
ㅡ |
a.1. Slide positioning accuracy less (better) than 0.0005 mm per 300
mm of travel; |
|
ㅡ |
a.2. Bidirectional slide positioning repeatability less (better)
than 0.00025 mm per 300 mm of travel; |
|
ㅡ |
a.3. Spindle “run out” and “camming” less (better) than 0.0004 mm
total indicator reading (TIR); |
|
ㅡ |
a.4. Angular deviation of the slide movement (yaw, pitch and roll)
less (better) than 2 seconds of arc, TIR,
over full travel; and |
|
ㅡ |
a.5. Slide perpendicularity less (better)
than 0.001 mm per 300 mm of travel; |
|
ㅡ |
Technical Note: The bidirectional slide positioning repeatability
(R) of an axis is the maximum value of the repeatability of
positioning at any position along or around the axis determined
using the procedure and under the conditions specified in part 2.11
of ISO 230/2: 1988. |
8459611000
8459612000
8459619000
8459691000, 8459699000
8466939000 |
b. Fly cutting machines having all of the following characteristics: |
|
ㅡ |
b.1. Spindle “run out” and “camming” less (better) than 0.0004 mm
TIR; and |
|
ㅡ |
b.2. Angular deviation of slide movement (yaw, pitch and roll) less
(better) than 2 seconds of arc, TIR, over full travel. |
8461401010
8461401090
8461402000
8461900000
8466939000 |
Gearmaking and/or finishing machinery not controlled by 2B003
capable of producing gears to a quality level of better than AGMA
11. |
|
ㅡ |
Dimensional inspection or measuring systems or equipment not
controlled by 2B006 or 2B206, as follows |
9027509000
9027892090
9031809099 |
a. Manual dimensional inspection machines, having both of the
following characteristics: |
|
ㅡ |
a.1. Two or more axes; and |
|
ㅡ |
a.2. A measurement uncertainty equal to or less (better) than (3 +
L/300) micrometer in any axes (L measured length in mm). |
8428701000
8428702000
8428709000
8431310000
8431390000 |
“Robots” not controlled by 2B007 or 2B207 that are capable of
employing feedback information in real-time processing from one or
more sensors to generate or modify “programs” or to generate or
modify numerical program data. “specially designed” for machine
tools controlled by 212, or for equipment controlled by 214, 215 or
216. |
8460120000
8460190000
8460220000
8460230000
8466939000 |
a. Spindle assemblies, consisting of spindles and bearings as a
minimal assembly, with radial (“run out”) or axial (“camming”) axis
motion in one revolution of the spindle less (better) than 0.0006 mm
total indicator reading (TIR); |
8460120000
8460190000
8460220000
8460230000
8466939000 |
b. Single point diamond cutting tool inserts, having all of the
following characteristics: |
|
ㅡ |
b.1. Flawless and chip-free cutting edge when magnified 400 times in
any direction; |
|
ㅡ |
b.2. Cutting radius from 0.1 to 5 mm
inclusive; and |
8542391000
8542392000
8542393000
8542394000
8542900000 |
c. “Specially designed” printed circuit boards with mounted “parts”
or “components” capable of upgrading, according to the
manufacturer's specifications, “numerical control” units, machine
tools or feed-back devices to or above the levels specified in 212,
214, 215, 216 or 217. |
|
ㅡ |
Specific processing equipment,, as follows |
8479899010
8479899099
8479909090 |
a. Isostatic presses,; |
8463900000
8479899099 |
b. Bellows manufacturing equipment, including hydraulic forming
equipment and bellows forming dies; |
|
ㅡ |
c. Laser welding machines; |
|
ㅡ |
d. MIG welders; |
|
ㅡ |
e. E-beam welders; |
|
ㅡ |
f. Monel equipment, including piping, tanks and vessels; |
|
ㅡ |
g. 304 and 316 stainless steel piping, tanks and vessels; |
|
ㅡ |
Note: Fittings are considered part of “piping” for purposes of
218.g. |
8430411000
8430491000
8430499000
50-0000
8431419000
43-0000 |
h. Mining and drilling equipment, as follows: |
|
ㅡ |
h.1. Large boring equipment capable of drilling holes greater than
two feet in diameter; |
|
ㅡ |
h.2. Large earth-moving equipment used in the mining industry; |
8543301000
8543309000
8543909000 |
i. Electroplating equipment designed for coating parts with nickel
or aluminum; |
8413190000
8413200000
8413309000
8413919000 |
j. Pumps designed for industrial service and for use with an
electrical motor of 5 HP or greater; |
4016930000
8481801090
8481900000
8484109000 |
k. Vacuum valves, piping, flanges, gaskets and related equipment
“specially designed” for use in
high-vacuum service,; |
8477590000
8477800000
8477900000 |
l. Spin forming and flow forming machines,; |
9031100000
9031809099 |
m. Centrifugal multiplane balancing
machines,; |
8481801090
8481900000
7310290000
7304490000 |
n. Austenitic stainless steel plate, valves, piping, tanks and
vessels. |
|
ㅡ |
“Software” “specially designed” or modified for the “development”,
“production” or “use” of equipment controlled by 205. |
|
ㅡ |
“Software” “required” for the
“development”, “production” or “use” of concealed object detection
equipment controlled by 206. |
|
ㅡ |
“Software” “specially designed” for the “development”, “production”,
or “use” of equipment controlled by 212, 214, 215, 216 or 217. |
|
ㅡ |
Specific “software”, as follows |
|
ㅡ |
a. “Software” to provide “adaptive control” and having both of the
following characteristics: |
|
ㅡ |
a.1. For “flexible manufacturing units” (FMUs) which consist at
least of equipment described in b.1 and b.2 of the definition of
“flexible
manufacturing unit”; and |
|
ㅡ |
a.2. Capable of generating or modifying, in “real-time processing”,
programs or data by using the signals obtained simultaneously by
means of at least two detection techniques, such as: |
|
ㅡ |
a.2.a. Machine vision (optical ranging); |
|
ㅡ |
a.2.b. Infrared imaging; |
|
ㅡ |
a.2.c. Acoustical imaging (acoustical ranging); |
|
ㅡ |
a.2.d. Tactile measurement; |
|
ㅡ |
a.2.e. Inertial positioning; |
|
ㅡ |
a.2.f. Force measurement; and |
|
ㅡ |
a.2.g. Torque measurement. |
|
ㅡ |
Note: 222.a does not control “software” which only provides
rescheduling of functionally identical equipment within “flexible
manufacturing units” using pre-stored part programs and a pre-stored
strategy for the distribution of the part programs. |
|
ㅡ |
"Software” “specially designed” or modified for the “development,”
“production,” or “use” of items controlled by 208 or 209. |
|
ㅡ |
“Software” “specially designed” for the “development” or
“production” of portable electric generators controlled by 210. |
|
ㅡ |
“Technology” “required” for the “development, “production” or “use”
of equipment controlled by 210 or “required” for the “development”
of “software” controlled by 220. |
|
ㅡ |
“Technology” for the “use” of equipment controlled by 212, 214, 215
or 216. |
|
ㅡ |
“Technology” according to the General Technology Note for the “use”
of equipment controlled by 208 or 209. |
|
ㅡ |
“Technology” for the “use” of portable electric generators
controlled by 210. |
|
7309000000 |
Tanks, Of Iron Or Steel, Of A Capacity Exceeding 300 Liters, Whether
Or Not Lined Or Heat Insulated, Not Fitted W Mechan Or Thermal
Equip. |
|
7309000000 |
Reservoirs, Vats And Similar Containers Of Iron Or Steel, Capacity
Over 300 Liters, Not Fitted With Mechanical Or Thermal Equipment. |
|
7310100000 |
Empty Steel Drums And Barrels, Of A Capacity Of 50 To 300 Liters,
Not For Liq Gas, Not Fitted With Mechanical Or Thermal Equipment |
|
7310100000 |
Tanks, Casks, Cans, Boxes And Similar Containers, Capacity 50- 300
Liters, Iron Or Steel, Not Fitted With Mechanical Or Thermal
Equipment. |
|
8402120000 |
Watertube Boilers With A Steam Production Not Exceeding 45 T Per
Hour |
8402191000
8402199000 |
Vapor Generating Boilers, Including Hybrid Boilers |
|
8402200000 |
Super-heated Water Boilers |
8402901000
8402902000
8419502000
8419509000 |
Heat Exchangers |
8402901000
8402902000 |
Parts For Steam Or Other Vapor Generating Boilers And Super-heated
Water Boilers, Except Heat Exchangers |
8405901000
8405902000
8405904000
8405909000 |
Parts For Producer Gas, Water Gas, Acetylene Gas And Similar Water
Process Gas Generators, With Or Without Their Purifiers |
8406901000
8406909000 |
Parts For Steam Turbines |
8406901000
8406909000 |
Parts For Other Than Steam Vapor Turbines |
8412101000
8412109000 |
Missile And Rocket Reaction Engines |
8412101000
8412109000 |
Reaction Engines Except Missile And Rocket Engines |
8412211000
8412219000 |
Linear Acting Hydraulic Motors With Tie-rod Type Cylinders |
8412211000
8412219000 |
Linear Acting Hydraulic Motors With Weld Fused Type Cylinders |
8412211000
8412219000 |
Linear Acting Hydraulic Motors With Telescoping Type Cylinders |
8412211000
8412219000 |
Linear Acting Hydraulic Motors With Rodless Type Cylinders |
8412211000
8412219000 |
Linear Acting Hydraulic Motors (Cylinders), |
|
8412290000 |
Hydraulic Power Engines, Unlimited Rotary Acting, Gear Type |
|
8412290000 |
Hydraulic Power Engines, Unlimited Rotary Acting, Radial Piston Type |
|
8412290000 |
Hydraulic Power Engines, Unlimited Rotary Acting, Axial Piston Type |
|
8412290000 |
Hydraulic Power Engines, Unlimited Rotary Acting |
|
8412290000 |
Hydraulic Power Engines And Motors |
|
8412390000 |
Pneumatic Power Engines And Motors, Unlimited Rotary Acting |
|
8412800000 |
Spring-operated And Weight-operated Motors |
|
8412800000 |
Engines And Motors, NESOI
(Ref. This paragraph covers engines and motors not included in the
preceding headings (headings 84.06 to 84.08, 84.10 or 84.11) or in
heading
85.01 or 85.02.) |
|
8414901000 |
Parts Of Fans (Including Blowers) And Ventilating Or Recycling Hoods
For Permanent Installation (Of Subheading 8414.51.00) |
8414901000
8414909090 |
Parts Of Other Fans (Including Blowers) And Ventilating Or Recycling
Hoods Not Permanently Installed |
8414909010
8414909020 |
Parts, Of Refrigerating And Air Conditioning Compressors |
|
8414909020 |
Parts, Of Compressors Other Than Refrigerating And Air Conditioning
Compressors |
|
8414909090 |
Parts Of Air Or Vacuum Pumps |
|
8415200000 |
Automotive Air Conditioners |
|
8415830000 |
Condensing Units Not Exceeding 17.58 Kw/Hr, Not Incorporating A
Refrigerating Unit |
|
8415830000 |
Condensing Units Exceeding 17.58 Kw/Hr (60000 Btu/Hr), Not
Incorporating A Refrigerating Unit |
|
8415830000 |
Heat Exchangers, Not Incorporating A Refrigerating Unit, |
|
8415830000 |
Air Conditioning Machines Not Incorporating A Refrigerating Unit |
|
8418610000 |
Heat Pumps Other Than Air Conditioning Machines Of Heading 8415 |
|
8418692020 |
Icemaking Machines |
|
8418692030 |
Drinking Water Coolers, Refrigerated, Self-contained |
|
8418692090 |
Soda Fountain And Beer Dispensing Equipment, Refrigerated |
|
8418692090 |
Centrifugal Liquid Chilling Refrigerating Units |
|
8418692090 |
Reciprocating Liquid Chilling Refrigerating Units |
|
8418692090 |
Absorption Liquid Chilling Units |
8418692090
8418693000 |
Refrigerating Or Freezing Equipment |
|
8419400000 |
Distilling Or Rectifying Plant, For The Treatment Of Materials By A
Process Involving A Change In Temperature |
8419891000
8419909010
8419909030
8419909050
8419909060
8419909070
8419909080
8419909090 |
Industrial Machinery, Plant Or Equipment For The Treatment Of
Materials, Involving A Change In Temperature |
8421191000
8421192000
8421193000
8421199000 |
Centrifuges, Including Centrifugal Dryers |
8421231000
8421232000
8421239000 |
Oil Or Fuel Filters For Internal Combustion Engines |
8421294000
8421299090 |
Refrigerant Recovery And Recycling Units For Filtering Or Purifying
Liquids |
8421292010
8421292090
8421299010
8421299090 |
Oil-separation Equipment For Filtering Or Purifying Liquid |
8421292010
8421292090
8421294000
8421299010
8421299090 |
Hydraulic Fluid Power Filters, Rated At 1000 Kpa Or Greater |
8421292010
8421292090
8421294000
8421299010
8421299090 |
Filtering Or Purifying Machinery And Apparatus For Liquids |
8421311000
8421312000
8421319000 |
Intake Air Filters For Internal Combustion Engines |
8421391000
8421392000
8421399011
8421399019
8421399021
8421399029
8421399030
8421399091
8421399099 |
Gas Separation Equipment |
8421391000
8421392000
8421399011
8421399019
8421399021
8421399029
8421399030
8421399091
8421399099 |
Filtering Or Purifying Machinery And Apparatus For Gases |
|
8421910000 |
Parts Of Centrifuges, Including Centrifugal Dryers |
8421999021
8421999029
8421999031
8421999039
8421999091
8421999099 |
Parts Of Machinery And Apparatus For Filtering Or Purifying Water |
8421991000
8421999010
8421999031
8421999039
8421999091
8421999099 |
Parts Of Machinery And Apparatus For Filtering Or Purifying Liquids
And Gases |
|
8424909090 |
Parts Of Steam And Similar Jet Projecting Machines |
8425111010
8425111090
8425112010
8425112090 |
Pulley Tackle And Hoists, Other Than Skip Hoists Or Hoists Of A Kind
Used For Raising Vehicles, Powered By Electric Motor |
8425311000
8425319000 |
Winches And Capstans Powered By Electric Motors |
8426121000
8426122000 |
Mobile Lifting Frames On Tires And Straddle Carriers |
8426991000
8426999000 |
Lifting Machinery |
8427201011
8427201012
8427201021
8427201022 |
Rider-Type, Counterbalanced, Self-Propelled Fork-Lift Trucks, Except
Powered by an Electric Motor |
|
8427209000 |
Self-Propelled Aerial Work Platforms, Except Powered by an Electric
Motor |
8427201011
8427201012
8427201021
8427201022
8427209000 |
Self-Propelled Fork-Lift And Other Works Trucks Fitted With Lifting
Equip, Except Powered by an Electric Motor |
|
8428201000 |
Conveyors,Pneumatic |
|
8428202000 |
Elevators, Pneumatic |
|
8428320000 |
Continuous-action Elevators And Conveyors, For Goods Or Materials,
Bucket Type |
8428331010
8428331020
8428332000 |
Belt Type Continuous-action Elevators And Conveyors,For Goods Or
Materials |
|
8428390000 |
Continuous-action Elevators And Conveyors,For Goods Or Materials |
8428901000
8428909000 |
Machinery For Lifting, Handling, Loading Or Unloading |
|
8429190000 |
Bulldozers And Angledozers, Self- propelled, New, Except Track
Laying |
|
8429190000 |
Bulldozers And Angledozers, Self- propelled, Used Or Rebult, Except
Track Laying |
8429511021
8429511022
8429590000 |
Backhoes, New, Except 360 Degree Revolving Superstructure |
|
8429590000 |
Shovels, Clamshells And Draglines, New, Except 360 Degree Revolving
Superstructures |
8429511021
8429511022
8429590000 |
Backhoes, Shovels, Clamshells, Draglines, Used Or Rebuilt |
|
8429590000 |
Ladder Type Ditchers And Trenchers, New |
|
8429590000 |
Ditchers And Trenchers, Except Ladder Type, New |
|
8429590000 |
Mechanical Shovels, Excavators And Shovel Loaders, Except 360 Degree
Revoling Superstructures, New |
|
8429590000 |
Mechanical Shovels, Excavators And Shovel Loaders, Except 360 Degree
Revoling Superstructures Used Or Rebuilt |
|
8430100000 |
Pile-drivers And Pile-extractors |
|
8430390000 |
Coal Or Rock Cutters And Tunneling Machinery, Other Than
Self-propelled |
|
8430500000 |
Moving, Grading, Leveling, Scraping, Excavating, Extracting
Machinery For Earth, Minerals Or Ores, Self-propelled |
|
8430690000 |
Moving, Grading, Leveling, Scraping, Excavating, Extracting
Machinery For Earth, Minerals Or Ores, Self-propelled |
|
8439100000 |
Machinery For Making Pulp Of Fibrous Cellulosic Material, New |
|
8439100000 |
Machinery For Making Pulp Of Fibrous Cellulosic Material, Used Or
Rebuilt |
8439301000
8439302000
8439303000
8439309000 |
Machinery For Finishing Paper Or Paperboard |
|
8441300000 |
Machines For Making Cartons, Boxes, Cases, Tubes, Drums Or Similar
Containers, Other Than By Molding |
|
8444003000 |
Texturing Machines For Man-made Textile Materials |
8444001000
8444002000
8444009000 |
Machines For Extruding, Drawing Or Cutting Man-made Textile
Materials |
|
8446210000 |
Power Looms For Weaving Fabrics Of A Width Exceeding 30 Cm, Shuttle
Type |
|
8446290000 |
Weaving Machines (Looms) For Weaving Fabrics Of A Width Exceeding 30
Cm, Shuttle Type, |
8448111000
8448112000
8448119000 |
Dobbies And Jacquard; Card Reducing, Copying, Punching Or Assembling
Machines For Use As Auxiliary Machines Of Heading 8444, 8445, 8446
Or 8447 |
8448191000
8448199000 |
Auxiliary Machinery, For Machines of Heading 8444, 8445, 8446 or
8447 |
8448201000
8448209000 |
Parts Of Machines For Extruding Or Drawing Man-made Textile
Filaments |
|
8448209000 |
Parts Of Texturing Machines |
|
8448209000 |
Parts And Accessories Of Machines Of Heading 8444 Or Of Their
Auxiliary Machinery |
|
8448330000 |
Spindles, Spindle Flyers, Spinning Rings And Ring Travellers |
|
8448399000 |
Parts Of Spinning, Doubling Or Twisting Machines |
|
8448399000 |
Parts Of Winding Or Reeling Machines |
8448391000
8448399000 |
Parts And Accessories Of Machines Of Heading 8445 Or Of Their
Auxiliary Machinery |
|
8448420000 |
Reeds For Looms, Healds And Heald- frames |
|
8448490000 |
Parts And Accessories Of Weaving Machines (Looms) Or Of Their
Auxiliary Machinery |
|
8451100000 |
Dry-cleaning Machines |
|
8451290000 |
Drying Machines, For Drying Made Up Articles |
|
8451290000 |
Drying Machines and valued exceeding
$750 |
8451301000
8451309000 |
Ironing Machines And Presses (Including Fusing Presses) |
8451902000
8451909000 |
Parts Of Machines For Washing, Dry-cleaning, Ironing, Pressing Or
Drying Made Up Textiles Articles Or Of Other Household Or Laundry
Type Machines |
8451902000
8451909000 |
Parts Of Machines For Bleaching, Dyeing, Washing Or Cleaning Textile
Yarns, Fabrics Or Made Up Textile Articles |
|
8454100000 |
Converters Used In Metallurgy Or Foundries |
|
8456900000 |
Machine Tools For Working Any Material Except Metal, By Removal Of
Material By Electron-Beam, Ionic-Beam Or Plasma Arc Processes |
|
8459100000 |
Way-type Unit Head Machines |
|
8459490000 |
Other Boring Machines, Not Numerically Controlled, Metal Removing,
Used Or Rebuilt |
|
8459490000 |
Other Boring Machines, Not Numerically Controlled, Metal Removing,
Valued Under $3,025 Each, New |
|
8459490000 |
Boring Machines, Vertical, Metal Removing, Except Numerically
Controlled, Valued $3,025 And Over Each, New |
|
8459490000 |
Boring Machines, Except Vertical, Metal Removing, Exc Numerically
Controlled, Valued $3,025 And Over, New |
8459701000
8459709000 |
Threading Or Tapping Machines, Metal Removing, Numerically
Controlled |
8459701000
8459709000 |
Threading Or Tapping Machines, Metal Removing, Except Numerically
Controlled, Used Or Rebuilt |
8459701000
8459709000 |
Threading Or Tapping Machines, Metal Removing, Except Numerically
Controlled, Valued Under $3,025 Each, New |
8459701000
8459709000 |
Threading Or Tapping Machines, Metal Removing, Except Numerically
Controlled, Valued $3,025 And Over Each, New |
|
8460900000 |
Machine Tools For Finishing Metal By Removing Metal Using Grinding
Stones, Abrasives Or Polishing Products, Used Or Rebuilt |
|
8460900000 |
Machine Tools For Finishing Metal By Removing Metal Using Grinding
Stones, Abrasives Or Polishing Products, Valued Under $3025 Each,
New |
|
8460900000 |
Machine Tools For Finishing Metal By Removing Metal Using Grinding
Stones, Abrasives Or Polishing Products, N/C, Valued $2,500 And Over
Each, New |
|
8460900000 |
Machine Tools For Finishing Metal By Removing Metal Using Grinding
Stones, Abrasives Or Polishing Products, Except N/C, Valued $3,025
And Over Each |
|
8461200000 |
Shaping Or Slotting Machines, Metal Removing, Numerically Controlled |
|
8461200000 |
Shaping Or Slotting Machines, Metal Removing, Numerically Controlled |
|
8461200000 |
Shaping Or Slotting Machines, Metal Removing, Except Numerically
Controlled, Valued Under $3,025 Each, New |
|
8461200000 |
Shaping Or Slotting Machines, Metal Removing, Except Numerically
Controlled, Valued $3,025 And Over Each, New |
|
8461300000 |
Broaching Machines, Metal Removing, Used Or Rebuilt |
|
8461300000 |
Broaching Machines, Metal Removing, Valued Under $3,025 Each, New |
|
8461300000 |
Broaching Machines, Metal Removing, Numerically Controlled, Valued
$2,500 And Over Each, New |
|
8461300000 |
Broaching Machines, Metal Removing, Except Numerically Controlled,
Valued
$2,500 And Over Each, New |
8461401010
8461401090 |
Gear Cutting Machines, Metal Removing, Used Or Rebuilt |
8461401010
8461401090 |
Gear Hobbers, Metal Removing By Cutting, New |
8461401010
8461401090 |
Gear Shapers, Metal Removing By Cutting, New |
8461401010
8461401090 |
Gear Cutting Machines, Metal Removing, Except Gear Hobbers Or
Shapers, New |
|
8461402000 |
Gear Grinding Or Finishing Machines, Metal Removing, Used Or Rebuilt |
|
8461402000 |
Gear Grinding Or Finishing Machines, Metal Removing, Valued Under
$3,025 Each, New |
|
8461402000 |
Gear Grinding Or Finishing Machines, Metal Removing, Valued $2,500
And Over, New |
|
8461500000 |
Sawing Or Cutting-Off Machines, Metal Removing, Used Or Rebuilt |
|
8461500000 |
Sawing Or Cutting-Off Machines, Metal Removing, Valued Under $3,025
Each, New |
|
8461500000 |
Sawing Or Cutting-Off Machines, Metal Removing, Numerically
Controlled, Valued $2,500 And Over, New |
|
8461500000 |
Sawing Or Cutting-Off Machines, Metal Removing, Except Numerically
Controlled, Valued 3,025 Over, New |
|
8461900000 |
Planing Machines, Numerically Controlled, Metal Removing, Used Or
Rebuilt |
|
8461900000 |
Planing Machines, Metal Removing, Numerically Controlled, Valued
$3,025 And Over Each, New |
|
8461900000 |
Machine Tools Working By Removing Metal, Numerically Controlled,
Used Or Rebuilt |
|
8461900000 |
Machine Tools Working By Removing Metal,Numerically Controlled,
Valued
$3,025 And Over Each, New |
|
8461900000 |
Planing Machines, Other Than Numerically Controlled, Metal Removing,
Used Or Rebuilt |
|
8461900000 |
Planing Machines, Not Numerically Controlled, Metal Removing, Valued
Under $3,025 Each, New |
|
8461900000 |
Planing Machines, Metal Removing, Except Numerically Controlled,
Valued
$3,025 And Over Each, New |
|
8461900000 |
Machine Tools Working By Removing Metal, Not Numerically Controlled,
Used Or Rebuilt |
|
8461900000 |
Machine Tools Working By Removing Metal, Not Numerically Controlled,
Valued Under $3,025 Each, New |
|
8461900000 |
Machine Tools Working By Removing Metal, ,Except Numerically
Controlled, Valued $3,025 And Over, New |
|
8462110000 |
Closed Die Forging Machines, Used Or Rebuilt |
|
8462110000 |
Closed Die Forging Machines, NESOI |
8462191000
8462199000 |
Forging Or Die-stamping Machines (Including Presses) And Hammers,
Metal Forming, Used Or Rebuilt |
8462191000
8462199000 |
Headers And Upsetters, Including Cold Headers, Metal Forming, New |
8462191000
8462199000 |
Mechanical Transfer Presses, New |
8462191000
8462199000 |
Forging Or Die-stamping Machines (Including Presses) And Hammers,
Except Headers And Upsetters, Metal Forming, New |
8465201000
8465209000 |
Machining Centers For Cork,Bone, Hard Rubber, Hard Plastics Or
Similar Hard Materials |
8465931000
8465939000 |
Belt Sanders For Woodworking, For A Belt Width 60 Cm Or Wider, Used
Or Rebuilt |
8465931000
8465939000 |
Grinding, Sanding Or Polishing Machines, Except Wide Belt Sanders,
Woodworking, Used Or Rebuilt |
8465931000
8465939000 |
Edge Belt Sanders, Woodworking, New |
8465931000
8465939000 |
Belt Sanders, (Except Edge Belt Sanders), For Woodworking, For A
Belt Width 60 Cm Or Wider, New |
8465931000
8465939000 |
Grinding, Sanding Or Polishing Machines, Woodworking, New |
8465931000
8465939000 |
Grinding, Sanding Or Polishing Machines For Cork, Bone, Hard Rubber,
Hard Plastics Or Similar Hard Materials |
|
8466100000 |
Tool Holders For Forming-type Or Cutting Type Dies |
|
8466100000 |
Holders For Replaceable Cutting Or Drill Inserts |
|
8466100000 |
Tool Holders And Self-opening Dieheads, |
8466201000
8466209000 |
Jigs And Fixtures For Machine Tools Used In Cutting Gears |
8466201000
8466209000 |
Work Holders For Machine Tools Used In Cutting Gears Other Than Jigs
And Fixtures |
8466201000
8466209000 |
Jigs And Fixtures For Metalworking Machine Tools |
8466201000
8466209000 |
Work Holders For Metalworking Machine Tools, Other Than Jigs And
Fixtures |
|
8466201000 |
Jigs And Fixtures, For Machine Tools |
8466201000
8466209000 |
Work Holders For Machine Tools |
|
8472100000 |
Duplicating Machines |
|
8472300000 |
Machines For Sorting Or Folding Mail, For Inserting Mail In
Envelopes, Postage Affixing Or Canceling Machines, Machines For
Opening Or Sealing Mail |
|
8473210000 |
Parts And Accessories Of Electronic Calculators And Calculating
Machines |
|
8474100000 |
Sorting, Screening, Separating Or Washing Machines For Earth, Stone,
Ores, Or Other Mineral Substances In Solid Form, Portable |
|
8474100000 |
Sorting, Screening, Separating Or Washing Machines For Earth, Stone,
Ores, Or Other Mineral Substances In Solid Form, Stationary |
|
8474390000 |
Mixing Or Kneading Machines, For Earth, Stone, Ores, Or Other
Mineral Substances In Solid Form |
8474801000
8474802000
8474809000 |
Machinery, Designed For Use With Ceramic Paste, Unhardened Cements
And Plastering Materials |
8474801000
8474802000
8474809000 |
Machines For Forming Foundry Molds Of Sand |
8474801000
8474802000
8474809000 |
Machines, For Agglomerating, Shaping, Or Molding Solid Mineral Fuels
Or Other Mineral Products In Powder Or Paste Form |
|
8475210000 |
Machines For Making Optical Fibers And Preforms Thereof |
8475291000
8475292000
8475299000 |
Machines For Manufacturing Or Hot Working Glass Or Glassware |
|
8477400000 |
Vacuum-molding Machines And Other Thermoforming Machines |
|
8477510000 |
Machinery For Molding Or Retreading Pneumatic Tires |
|
8477510000 |
Machinery For Molding Or Otherwise Forming Inner Tubes |
|
8477590000 |
Machinery For Molding Or Otherwise Forming Rubber Or Plastics |
|
8477900000 |
Parts Of Injection-molding Machines For Rubber Or Plastics |
|
8477900000 |
Parts Of Extruders For Rubber Or Plastics |
|
8477900000 |
Parts Of Blow-molding Machines |
|
8477900000 |
Parts Of Machines For Forming Pneumatic Tires |
|
8477900000 |
Parts Of Machinery For Working Rubber Or Plastics Or For The
Manufacture Of Products From These Materials |
8479101000
8479102000
8479109000 |
Pavers, Finishers And Spreaders For Concrete, For Public Works,
Building Or Similar Use |
8479101000
8479102000
8479109000 |
Pavers, Finishers And Spreaders For Bituminous Material, For Public
Works, Building Or Similar Use |
8479101000
8479102000
8479109000 |
Machinery For Public Works, Building Or The Like, Except Concrete
And Bituminous Pavers, Finishers And Spreaders |
|
8479300000 |
Presses For The Manufacture Of Particle Board Or Fiber Building
Board Of Wood Or Other Ligneous Materials And Oth Machinery For
Treating Wood Or Cork |
8479501000
8479502000
8479509000 |
Industrial Robots |
|
8479899099 |
Oil And Gas Field Wire Line And Downhole Equipment |
|
8479899099 |
Machines And Mechanical Appliances Having Individual Functions, Not
Specified Or Included Elsewhere In Chapter 84 |
8479903000
8479905010
8479905090
8479909010
8479909020
8479909030
8479909040
8479909050
8479909060
8479909070
8479909090 |
Parts Of Industrial Robots |
|
8479909010 |
Machinery For Public Works, Building Or The Like; Parts |
|
8479909090 |
Parts Of Presses For Manufacture Of Particle Board Or Fiber Building
Board Of Wood Or Oth Ligneous Material and Other Machinary For
Treating Wood |
|
8479909040 |
Parts Of Machines Or Mechanical Appliances For Treating Metal |
|
8479909090 |
Parts Of Machines And Mechanical Appliances Having Individual
Functions, Not Specified Or Included Elsewhere In Chapter 84 |
|
8480200000 |
Mold Bases |
|
8480300000 |
Molding Patterns |
|
8480600000 |
Molds For Mineral Materials |
|
8481100000 |
Pressure-reducing Valves, Hydraulic Fluid Power Type |
|
8481100000 |
Pressure-reducing Valves, Pneumatic Fluid Power Type,
Filter-regulators And Filter-regulator-lubricators |
|
8481100000 |
Pressure-reducing Valves, Pneumatic Fluid Power Type |
|
8481100000 |
Pressure-reducing Valves, NESOI |
8481201000
8481202000 |
Hydraulic Valves, Directional Control, Manual Type |
8481201000
8481202000 |
Hydraulic Valves, Directional Control, Solenoid Type |
8481201000
8481202000 |
Hydraulic Valves, Directional Control |
8481201000
8481202000 |
Hydraulic Valves, Flow Control Type |
8481201000
8481202000 |
Hydraulic Valves, NESOI |
8481201000
8481202000 |
Pneumatic Valves, Directional Control, Solenoid Type |
8481201000
8481202000 |
Pneumatic Valves, Directional Control |
8481201000
8481202000 |
Pneumatic Valves, NESOI |
|
8481400000 |
Safety Or Relief Valves |
8482102000
8482109000 |
Ball Bearings With Integral Shafts |
8482102000
8482109000 |
Unground Bearings |
8482102000
8482109000 |
Thrust Ball Bearings |
8482102000
8482109000 |
Linear Ball Bearings |
8482102000
8482109000 |
Angular Contact Bearings, Wheel Hub Units, Flanged |
8482102000
8482109000 |
Angular Contact Bearings, Wheel Hub Units, Other Than Flanged |
8482102000
8482109000 |
Angular Contact Ball Bearings, NESOI |
8482102000
8482109000 |
Radial Bearings, Single Row, Maximum Or Full Capacity Type |
8482102000
8482109000 |
Radial Bearings, Single Row, Having An Outside Diameter Of Under 9
Mm |
8482102000
8482109000 |
Radial Bearings, Single Row, Having An Outside Diameter Of 9 Mm And
Over But Not Over 30 Mm |
8482102000
8482109000 |
Radial Bearings, Single Row, Having An Outside Diameter Of Over 30
Mm But Not Over 52 Mm |
8482102000
8482109000 |
Radial Bearings, Single Row Having An Outside Diameter Of Over 52 Mm
But Not Over 100 Mm |
8482102000
8482109000 |
Radial Bearings, Single Row Having An Outside Diameter Of Over 100
Mm |
8482102000
8482109000 |
Double Row Ball Bearings,Radial |
8482102000
8482109000 |
Radial Ball Bearings |
8482102000
8482109000 |
Ball Bearings, NESOI |
|
8482200000 |
Tapered Roller Bearings, Cup And Cone Assemblies Entered As A Set,
Wheel Hub Units, Flanged |
|
8482200000 |
Tapered Roller Bearings, Cup And Cone Assemblies Entered As A Set,
Wheel Hub Units, Other Than Flanged |
|
8482200000 |
Tapered Roller Bearings, Cup And Cone Assemblies Entered As A Set,
With Cup Having Outside Diameter Not Exceeding 102 Mm |
|
8482200000 |
Tapered Roller Bearings, Cup And Cone Assemblies Entered As A Set,
With Cup Having Outside Diameter Exceeding 102mm |
|
8482200000 |
Tapered Roller Bearings, Cone Assemblies Entered Separately, For
Cups Having Outside Diameter Not Exceeding 102 Mm |
|
8482200000 |
Tapered Roller Bearings, Cone Assemblies Entered Separately, For
Cups Having Outside Diameter Exceeding 102 Mm |
|
8482300000 |
Spherical Roller Bearings, Single Row |
|
8482300000 |
Spherical Roller Bearings, Other Than Single Row |
|
8482400000 |
Needle Roller Bearings |
|
8482800000 |
Combined Ball & Spherical Roller Bearings |
|
8482800000 |
Combined Ball & Needle Roller Bearings |
|
8482800000 |
Combined Ball & Other Cylindrical Roller Bearings |
|
8482800000 |
Other Ball Or Roller Bearings, Including Combined Ball/Roller
Bearings |
|
8482910000 |
Alloy Steel Balls For Ball Bearings |
|
8482910000 |
Balls For Ball Bearings, Except Alloy Steel |
|
8482910000 |
Needles For Needle Roller Bearings |
|
8482910000 |
Tapered Rollers For Roller Bearings |
|
8482910000 |
Spherical Rollers For Roller Bearings |
|
8482910000 |
Other Cylindrical Rollers For Roller Bearings |
|
8482910000 |
Rollers, For Roller Bearings |
|
8482990000 |
Inner And Outer Races For Ball Bearings (Including Ball Bearings
With Integral Shafts) |
|
8482990000 |
Parts, Except Inner And Outer Races, For Ball Bearings, (Including
Ball Bearings With Integral Shafts) |
|
8482990000 |
Cups Entered Separately For Tapered Roller Bearings |
|
8482990000 |
Parts, Except Cups Entered Separately, For Tapered Roller Bearings |
|
8482990000 |
Parts Of Spherical Roller Bearings |
|
8482990000 |
Parts, For Needle Bearings |
|
8482990000 |
Parts, For Cylindrical Roller Bearings |
|
8482990000 |
Parts, For Roller Bearings Or For Combined Ball/Roller Bearings, |
8486901000
8486902030
8486902040 |
Machines Used For The Manufacture Of Boules Or Wafers,
Semiconductors, |
8486902090
8486903050
8486903060
8486903090
8486904000 |
Electronic Integrated Circuits Or Flat Panel Displays; Parts &
Accessories |
|
8487909090 |
Machinery Parts Not Containing Electrical Features, And Not
Specified Or Included Elsewhere In Chapter 84, Except Ships'
Propellers |
|
8501201000 |
Universal Ac/Dc Electric Motors Of An Output Exceeding 37.5 W But
Not Exceeding 74.6 W |
8501201000
8501202000 |
Universal Ac/Dc Electric Motors, Of An Output Exceeding 74.6 W (1/10
Hp) But Not Exceeding 746 W (1 Hp) |
8501202000
8501203000 |
Universal Ac/Dc Electric Motors Of An Output Of 746 W And Over |
|
8501311010 |
Dc Motors Of An Output Exceeding
37.5 W But Not Exceeding 74.6 W, |
|
8501311010 |
Dc Motors, Exceeding 74.6 W (1/10 Hp) But Not Exceeding 746 W (1
Hp), |
|
8501311090 |
Dc Motors Of An Output Exceeding 746 W But Not Exceeding 750 W |
|
8501312000 |
Dc Generators, Not Exceeding 750 W |
|
8501331000 |
Dc Electric Motors, Exceeding 75 Kw (100 Hp) But Not Exceeding 149.2
Kw (200 Hp) |
|
8501331000 |
Dc Motors, 149.2kw Or More But Not Exceeding 150kw |
|
8501331000 |
Dc Motors Of An Output Exceeding
150 Kw But Not Exceeding 373 Kw |
|
8501331000 |
Dc Motors Of An Output Exceeding
373 Kw But Not Exceeding 375 Kw |
|
8501332000 |
Dc Generators Of An Output Exceeding 75kw But Not Exceeding 375kw |
8501611000
8501612000 |
Ac Generators (Alternators) Of An Output Not Exceeding 75 Kva |
|
8501620000 |
Ac Generators (Alternators) Of An Output Not Exceeding 75 Kva |
8501631000
8501639000 |
Ac Generators (Alternator) Of An Output Exceeding 75 Kva But Not
Exceeding 375 Kva |
|
8501640000 |
Ac Generators (Alternators), Output Exceeding 750 Kva But Not
Exceeding 10,000 Kva |
|
8501640000 |
Ac Generators (Alternators), Output Exceeding 10,000 Kva But Not
Exceeding 40,000 Kva |
|
8501640000 |
Ac Generators (Alternators), Output Exceeding 40,000 Kva |
8502131010
8502131090
8502132000 |
Generating Sets, Electric, Diesel, Or Semidiesel, Of An Output
Exceeding
375 Kva But Not Exceeding 1,000 Kva |
8502132000
8502134000 |
Generating Sets, Electric, Diesel, Of An Output Exceeding 1,000 Kva |
|
8502201000 |
Generating Sets With Spark-ignition Internal Combustion Piston
Engines Of An Not Exceeding 5 Kva |
8502201000
8502202000
8502203010 |
Generating Sets With Spark Ignition Internal Combustion Piston
Engines Of |
8502203090
8502204000 |
An Output Exceeding 5kw, Electric, Gasoline |
8502311000
8502312000
8502314000 |
Wind-powered Electric Generating Sets |
8502391000
8502392000
8502393000
8502394000 |
Electric Generating Sets Powered By Gas Turbines |
8502391000
8502392000
8502393000
8502394000 |
Electric Generating Sets, Other Than Powered By Gas Turbines |
|
8502400000 |
Electric Rotary Converters |
8504321000
8504322000
8504329010
8504329020 |
Transformers, Having A Power Handling Capacity Exceeding 1 Kva But
Not Exceeding 16 Kva |
8504331000
8504332000
8504339010
8504339020 |
Transformers, Having A Power Handling Capacity Exceeding 16 Kva But
Not Exceeding 50 Kva |
8504331000
8504332000
8504339020
8504339040 |
Transformers, Having A Power Handling Capacity Exceeding 50 Kva But
Not Exceeding 500 Kva |
8504341000
8504342000
8504349010
8504349030 |
Transformers, Having A Power Handling Capacity Exceeding 500 Kva |
|
8505200000 |
Electromagnetic Couplings, Clutches And Brakes |
|
8506600000 |
Primary Batteries, Air-Zinc |
|
8506900000 |
Primary Battery And Cell Parts |
|
8507300000 |
Nickel-cadmium Storage Batteries |
8514311000
8514319000 |
Electron Beam Furnaces |
8514321000
8514329000 |
Plasma And Vacuum Arc Furnaces |
8514391000
8514399000 |
Industrial Or Laboratory Electric Furnaces And Ovens |
|
8516210000 |
Electric Storage Heating Radiators |
8525502000
8525509000 |
Television Apparatus For The Reception Of Television Signals Relayed
By Television Satellite |
8525502000
8525509000 |
Television Transmission Apparatus |
8525501000
8525509000 |
Radio Transmitters For Civil Aircraft |
8525501000
8525509000 |
Radio Transmitters Capable Of Transmitting On Frequencies Not
Exceeding 30 Mhz, Not For Use In Civil Aircraft |
8525501000
8525502000
8525509000 |
Transmission Apparatus For Civil Aircraft |
8525501000
8525509000 |
Transmission Apparatus For Radio telephony, Radio telegraphy, Radio
broadcasting |
|
8526920000 |
Radio Remote Control Apparatus |
8530101000
8530109000 |
Electrical Signaling, Safety Or Traffic Control Equipment For
Railways, Streetcar Lines Or Subways |
|
8530900000 |
Electrical Signaling Parts For Traffic Control, Safety Equipment For
Railway, Subways, Roads, Airfields, Waterways And Parking Facilities |
|
8532100000 |
Fixed Capacitors, Designed For Use In 50/60 Hz Circuits, With
Reactive Power Capacity Not Less Than 0.5 Kvar |
|
8537105010 |
Numerical Controls For Controlling Machine Tools, For Voltage Not
Exceeding 1,000 V |
|
8540200000 |
Cathode Ray Television Camera Tubes And Other Photocathode Tubes |
|
8540200000 |
TV Camera, Image Intensifier & Converter Tubes |
8540601000
8540609000 |
Cathode-ray Tubes, Having A Video Display Diagonal Not Exceeding 36
Cm (14 Inches) |
8540601000
8540609000 |
Cathode-ray Tubes, Having A Video Display Diagonal Exceeding 36 Cm |
|
8540710000 |
Magnetrons Modified For Use In Microwave Ovens |
|
8540710000 |
Magnetron Microwave Tubes |
|
8540791000 |
Klystron Microwave Tubes |
|
8540799000 |
Microwave Tubes |
|
8540810000 |
Receiver Or Amplifier Tubes |
8540891000
8540892000
8540899000 |
Gas And Vapor Electron Tubes |
8540891000
8540892000
8540899000 |
Diode, Triode, And Tetrode Type Tubes |
8540891000
8540892000
8540899000 |
Light-sensing Tubes |
8540891000
8540892000
8540899000 |
Thermionic, Cold Cathode Or Photocathode Tubes |
|
8540910000 |
Deflection Coils For Cathode Ray Tubes |
|
8540910000 |
Cathode Ray Tube Parts |
|
8540990000 |
Thermionic, Cold Cathode Or Photocathode Tube Parts |
8541101000
8541109000 |
Unmounted Chips Dice Wafers For Diodes Other Than Photosensitive Or
Lightemitting Diodes |
8541101000
8541109000 |
Zener Diodes |
8541101000
8541109000 |
Microwave Diodes |
8541101000
8541109000 |
Diodes Other Than Photosensitve Or Led With A Maximum Current Of 5A
Or Less |
8541101000
8541109000 |
Diodes Other Than Photosensitve Or Led With A Current Greater Than
5A |
8541511000
8541512000
8541513000
8541514000 |
Semiconductor Based Transducers |
8541591000
8541599000 |
Unmounted Chips Dice Wafers For Semiconductor Devices |
8541591000
8541599000 |
Semiconductor Devices |
8541601000
8541609000 |
Mounted Piezoelectric Crystals Quartz Designed For Operating
Frequencies Not Exceeding 20 Mhz |
8541601000
8541609000 |
Mounted Piezoelectric Crystals Quartz Designed For Operating
Frequencies Exceeding 20 Mhz |
8541601000
8541609000 |
Mounted Piezoelectric Crystals Except Quartz |
8541902000
8541903000
8541909000 |
Diode Transistor Similar Semiconductor Device Parts |
8542311000
8542312000
8542313000
8542314000 |
Electronic Integrated Circuits Processors Controllers Whnot Combined
Wmemories Converters Logic Circuits Amplifiers Clock Etc |
|
8542321010 |
Electric Integrated Circuits Memory |
8542322000
8542323000
8542324000 |
Dynamic Readwrite Random Access Not Over 1 Gigabit |
8542321010
8542322000
8542323000
8542324000 |
Electronic Integrated Circuits Memory Dynamic Readwrite Random
Access Dram Over 1 Gigabit |
8542321020
8542322000
8542323000
8542324000 |
Electric Integrated Circuits Memory Static Readwrite Random Access
Sram |
8542321090
8542322000
8542323000
8542324000 |
Electronic Integrated Circuits Electrically Erasable Programmable
Readonly Memory Eeprom |
8542321090
8542322000
8542323000
8542324000 |
Electric Integrated Circuitserasable Except Electrically
Programmable Readonly Memory Eprom |
8542321090
8542322000
8542323000
8542324000 |
Electronic Integrated Circuits Memory |
8542331000
8542332000
8542333000
8542334000 |
Electronic Integrated Circuits Amplifiers |
8542391000
8542392000
8542393000
8542394000 |
Electronic Integrated Circuits |
|
8542900000 |
Electronic Integrated Circuits And Microassembly Parts |
|
8601100000 |
Rail Locomotives Powered From An External Source Of Electricity |
|
8602900000 |
Rail Locomotives; Locomotive Tenders |
8604004000
8604009000 |
Railway Or Tramway Maintenance Or Service Vehicles, Whether Or Not
Self-propelled (For Example, Workshops, Cranes, Ballast Tampers,
Trackliners, Etc) |
|
8606920000 |
Railway Or Tramway Freight Cars, Open, With Non-removable Sides Of A
Height Exceeding 60 Cm, Not Self- propelled |
|
8543100000 |
Particle Accelerators |
|
8704100000 |
Cab Chassis, Dumpers Designed For Off-highway Use |
|
8704100000 |
Motr Vehicles For The Transport Of Goods, Rear Dump,Designed For
Off- highway Use,With Capacty Of 40.8 Metric Tons Or Less |
|
8704100000 |
Motor Veh For The Transport Of Goods, Rear Dump, Designed For Off-
highway Use, With A Capacity Exceeding 40.8 Metric Tons But Not
Exceed 63.5 Metric Tons |
|
8704100000 |
Motor Veh For Transport Of Goods, Rear Dump, Designed For Off-
highway Use, With A Capacity Exceeding 63.5 Metric Tons But Not
Exceed 90.7 Metric Tons |
|
8704100000 |
Motor Veh For Transport Of Goods, Rear Dump,Off-highway Use,Capacity
Exceeding 90.7 Metric Tons |
|
8704100000 |
Motor Vehicles For Transport Of Goods, Dumpers Designed For
Off-highway Use, Except Rear Dump |
8704211010
8704211020
8704219010
8704219020
8704219090 |
Motor Vehicles For Transport Of Goods, Diesel Engine, Gvw Not
Exceeding 5 Metric Tons |
8704221011
8704221012
8704229010
8704229020
8704229090 |
Motor Vehicles For The Transport Of Goods, Diesel Engine, Gvw
Exceeding
5 Metric Tons But Not Exceeding 9 Metric Tons |
8704221011
8704221012
8704221091
8704221092
8704229010
8704229020
8704229090 |
Motor Vehicles For The Transport Of Goods, Diesel Engine, Gvw
Exceeding
9 Metric Tons But Not Exceeding 12 Metric Tons |
8704221091
8704221092
8704229010
8704229020
8704229090 |
Motor Vehicles For The Transport Of Goods, Diesel Engine, Gvw
Exceeding
12 Metric Tons But Not Exceeding 15 Metric Tons |
8704221091
8704221092
8704229010
8704229020
8704229090 |
Motor Vehicles For The Transport Of Goods, Diesel Engine, Gvw
Exceeding
15 Metric Tons But Not Exceeding 20 Metric Tons |
8704321010
8704321020
8704329010
8704329020
8704329090 |
Motor Vehicles For The Transport Of Goods, Spark-ignition Internal
Combustion Piston Engine, Gvw Exceeding 5 M Tons But Not Exceeding
9M Tons |
8704321010
8704321020
8704329010
8704329020
8704329090 |
Motor Vehicles For The Transport Of Goods, Spark-ignition Internal
Combustion Piston Engine, Gvw Exceeding 9 M Tons But Not Exceeding
12M Tons |
8704321010
8704321020
8704329010
8704329020
8704329090 |
Motor Vehicles For The Transport Of Goods, Spark-ignition Internal
Combustion Piston Engine, Gvw Exceeding 12 But Not Exceeding 15
Metric Tons |
8704321010
8704321020
8704329010
8704329020
8704329090 |
Motor Vehicles For The Transport Of Goods, Spark-ignition Internal
Combustion Piston Engine, Gvw Exceeding 15 But Not Exceeding 20
Metric Tons |
8704321010
8704321020
8704329010
8704329020
8704329090 |
Motor Vehicles For The Transport Of Goods, Spark-ignition Internal
Combustion Piston Engine, Gvw Exceeding 20 Metric Tons |
8705901010
8705901090
8705909010
8705909020
8705909030
8705909040
8705909050
8705909060
8705909070
8705909090 |
Special Purpose Vehicles |
|
8709110000 |
Works Trucks For Use In Warehouses, Factories, Etc, Electrical,
Operator Riding, Not Fitted With Lifting Or Handling Equipment |
|
8709110000 |
Self-propelled Works Trucks Without Lifting Or Handling Equipment
For Short Distance Transport Of Goods, Electrical, Except Operator
Riding |
|
8709900000 |
Parts For Works Trucks For Use In Warehouses, Factories, Etc, Not
Fitted With Lifting Or Handling Equipment |
|
8716200000 |
Self-loading Or Self-unloading Trailers And Semi-trailers For
Agricultural Purposes |
|
8716390000 |
Trailers And Semi-trailers, For Agricultural Use |
|
8716390000 |
Trailers And Semi-trailers, For Use With Vehicles, Of Heading 8709 |
|
8716390000 |
Trailers And Semi-trailers, For Use With Vehicles, Of Heading 8703 |
|
8716390000 |
Trailers And Semi-trailers, Van Type |
|
8716390000 |
Trailers And Semi-trailers, Platform Type |
|
8716390000 |
Trailers And Semi-trailers, For Transport Of Goods |
|
9006300000 |
Cameras Designed For Underwater Use For Aerial Survey Or
Medicalsurgical Examination Of Internal Organs Cameras For Forensic
Or Criminological Use |
|
9006400000 |
Instant Print Cameras |
9006531000
9006539010
9006539090 |
Other Cameras With Through the lens Viewfinder Single Lens Reflex
Slr For Roll Film Of A Width Of 35 Mm |
9006531000
9006539010
9006539090 |
Photo Cameras For Roll Film Of A Width Of 35 Mm 14 Inch |
9006591000
9006599000 |
Photo Cameras For Roll Film Of A Width Less Than 35 Mm 14 Inch |
9006591000
9006599000 |
Cameras Of A Kind Used For Preparing Printing Plates Or Cylinders |
9006591000
9006599000 |
Photographic Other Than Cinematographic Cameras |
|
9006610000 |
Photographic Discharge Lamp Electronic Flashlight Apparatus |
|
9006690000 |
Flashbulbs Flashcubes And The Like |
|
9006690000 |
Photographic Flashlight Apparatus And Flashbulbs |
|
9006910000 |
Parts And Accessories For Photographic Other Than Cinematographic
Cameras |
|
9006990000 |
Parts And Accessories Of Photographic Flashlight Apparatus And
Flashbulbs Other Than Discharge Lamps Of Heading 8539 |
9010101000
9010109010
9010109090 |
Apparatus & Equipment, Automatically Developing Photographic
Film/Paper In Rolls, Automatically Exposing Developing Film To Roll
Of Photographic Paper |
|
9015400000 |
Photogrammetrical Surveying Instruments And Appliances |
9015801000
9015802000
9015803000
9015804000
9015805000
9015809000 |
Optical Surveying, Hydrographic, Oceanographic, Hydrological,
Meteorological Or Geophysical Instruments And Appliances, Exc
Rangefinder&Compasses |
9015801000
9015809000 |
Seismographs |
9015801000
9015809000 |
Geophysical Instruments And Appliances |
9015801000
9015802000
9015803000
9015804000
9015805000
9015809000 |
Surveying, Hydrographic, Oceanographic, Hydrological Or
Meteorological Instruments And Appliances, Excluding Compasses And
Rangefinders |
9026101000
9026102000 |
Flow Meters For Measuring Or Checking The Flow Or Level Of Liquids |
9026101000
9026102000 |
Instruments And Apparatus For Measuring Or Checking The Flow Or
Level Of Liquids |
9026202000
9026203000
9026204000
9026209000 |
Instruments And Apparatus For Measuring Or Checking Pressure |
9026801000
9026802000
9026809000 |
Instruments And Apparatus For Measuring Or Checking Other Variables
Of Liquids Or Gases |
|
9026900000 |
Parts And Accessories For Instruments And Apparatus For Measuring Or
Checking The Flow Level Pressure Or Other Variables Of Liquids Or
Gases |
9029101000
9029102000
9029109000 |
Revolution Counters, Production Counters, Taximeters, Odometers,
Pedometers And The Like |
|
9031200000 |
Test Benches |
9031494010
9031494090 |
Profile Projectors |
|
9031499000 |
Coordinate-measuring Machines For Optical Instruments And Appliances |
|
9031499000 |
Optical Instruments And Appliances |
|
9031809010 |
Equipment For Testing Electrical Characteristics Of Internal
Combustion Engines |
|
9031809010 |
Equipment For Testing The Characteristics Of Internal Combustion
Engines |
9031801000
9031802000
9031809020
9031809060
9031809070
9031809080
9031809091
9031809099 |
Measuring Or Checking Instruments, Appliances And Machines |
9032811000
9032812000
9032819000 |
Hydraulic Or Pneumatic Industrial Process Control Instruments And
Apparatus |
9032811000
9032812000
9032819000 |
Hydraulic And Pneumatic Instruments And Apparatus Except Industrial
Process Control |
9032892010
9032892090
9032893010
9032893090 |
Automatic Voltage And Voltage- current Regulators |
9032101020
9032101090
9032891010
9032891010
9032891090
9032899010
9032899090 |
Control Instruments For Air Conditioning, Refrigeration Or Heating
Systems |
9032899010
9032899090 |
Process Control Instruments And Apparatus For Complete Systems |
9032101010
9032101020
9032101090
9032102000, 9032899010
9032899090 |
Process Control Instruments And Apparatus For Temperature Control |
9032200000
9032899010
9032899090 |
Process Control Instruments And Apparatus For Pressure Draft Control |
9032894010
9032894091
9032894099
9032899010
9032899090 |
Process Control Instruments And Apparatus For Flow And Liquid Level
Control |
9032891010
9032891090 |
Process Control Instruments And Apparatus For Humidity Control |
9032899010
9032899090 |
Process Control Instruments And Apparatus |
9032899010
9032899090 |
Automatic Regulating Or Controlling Instruments |
| |
Chemicals in concentrations of 95% weight or greater, as follows; |
2903150000
3808599000 |
Ethylene dichloride |
2904201000
2904209010
2904209090 |
Nitromethane |
|
2908990000 |
Picric acid |
2827320000
3815901000
3815909000 |
Aluminum chloride |
|
2804800000 |
Arsenic |
2811291000
2811292000
2811299000 |
Arsenic trioxide |
2921192000
2921199010
2921199090 |
B i s ( 2 – c h l o r o e t h y l ) e t h y l a m i n e
hydrochloride |
2921192000
2921199010
2921199090 |
B i s ( 2 – c h l o r o e t h y l ) m e t h y l a m i n e
hydrochloride |
2921192000
2921199010
2921199090 |
Tris(2-chloroethyl)amine hydrochloride |
|
2920290000 |
Tributylphosphite |
2929101000
2929102000
2929109000 |
Isocyanatomethane |
2933491000
2933499010
2933499090 |
Quinaldine |
|
2903790000 |
2-bromo-chloroethane |
|
2914390000 |
Benzil |
2909110000
2909191000
2909192000
2909199000 |
Diethyl ether |
2909191000 2909192000
2909199000 |
Dimethyl ether |
2922193000
2922199000 |
Dimethylaminoethanol |
2909441000
2909449000 |
2-methoxyethanol |
|
3507909000 |
Butyrylcholinesterase (BCHE); |
2921291000
2921292000
2921299000 |
Diethylenetriamine |
2903120000
3824999090 |
Dichloromethane |
2921429020
2921429090 |
Dimethylaniline |
|
2903690000 |
Ethyl bromide |
2903111000
2903112000 |
Ethyl chloride |
2921192000
2921199010
2921199090 |
Ethylamine |
2933691000
2933692000
2933699099 |
Hexamine |
2905122010
2905122090 |
Isopropanol |
|
2903690000 |
Isopropyl bromide |
2909191000
2909192000
2909199000 |
Isopropyl ether |
2921111010
2921111020
2921112010, 2921112020 |
Methylamine |
2903610000
3808919000 |
Methyl bromide |
2921192000
2921199010
2921199090 |
Monoisopropylamine |
2933393000
2933399000 |
Obidoxime chloride |
2827511000
2827512000 |
Potassium bromide |
2933311000
2933312000 |
Pyridine |
2933392000
2933393000
2933399000 |
Pyridostigmine bromide |
2827511000
2827512000
2827590000 |
Sodium bromide |
|
2805110000 |
Sodium metal |
2921192000
2921199010
2921199090 |
Tributylamine |
2921192000
2921199010
2921199090 |
Triethylamine |
2921113010
2921113020 |
Trimethylamine |
| |
Chemicals in concentrations of 90% weight or greater, as follows; |
|
2914110000 |
Acetone |
2901291000
2901292000, 2901299000 |
Acetylene |
|
2814100000 |
Ammonia |
|
8110100000 |
Antimony |
|
2912210000 |
Benzaldehyde |
2914401000
2914409000 |
Benzoin |
|
2905130000 |
1-Butanol |
|
2905140000 |
2-Butanol |
2905140000
3815909000 |
Iso-Butanol |
2905140000
3905910000
3906909000 |
Tert-Butanol |
|
2849100000 |
Calcium carbide |
2811291000
2811292000
2811299000 |
Carbon monoxide |
|
2801100000 |
Chlorine |
|
2906120000 |
Cyclohexanol |
2921301000
2921309000 |
Dicyclohexylamine |
2207101000
2207109010
2207109090
2207200000 |
Ethanol |
2901210000
2711290000
2711141000 |
Ethylene |
2910100000
3808599000 |
Ethylene oxide |
2835391000
2835392000
2835399000
2826902000
2826903000
2826904000
2826905000
2826906000
2826909000 |
Fluoroapatite |
|
2806100000 |
Hydrogen chloride |
2811192000
2811193000
2811196000
2811199000 |
Hydrogen sulfide |
2918191010
2918191090
2918192000
2918193000
2918199000 |
Mandelic acid |
2905110000
3824999090 |
Methanol |
2903111000
2903112000 |
Methyl chloride |
|
2903690000 |
Methyl iodide |
2930906010
2930906090
2930909090 |
Methyl mercaptan |
|
2905310000 |
Monoethyleneglycol |
2917192000
2917193000
2917199000 |
Oxalyl chloride |
2830901000
2830902000 |
Potassium sulfide |
2842903000
2842909000 |
Potassium thiocyanate |
2828901000
2828909000 |
Sodium hypochlorite |
2802001000
2802002000
2802003000
2503000000 |
Sulphur |
2811291000
2811292000
2811299000 |
Sulphur dioxide |
2811291000
2811292000
2811299000
3815909000 |
Sulphur trioxide |
|
2853909000 |
Thiophosphoryl chloride |
|
2920290000 |
Tri-isobutyl phosphite |
2804701000
2804709000 |
White phosphorus |
2804701000
2804709000 |
Yellow phosphorus |
2933330000
2933340000
2934920000 |
Fentanyl and its derivatives Alfentanil, Sufentanil, Remifentanil,
Carfentanil, thiafentanil, and salts thereof.
Note: 741 does not control products identified as consumer goods
packaged for retail sale for personal use or packaged for individual
use |
| |
Chemical precursors to Central Nervous System Acting Chemicals, as
follows:
Note 1: This paragraph does not control “chemical mixtures”
containing one or more of the chemicals specified in this paragraph
in which no individually specified chemical constitutes more than 1
% by the weight of the mixture.
Note 2: This paragraph does not control products identified as
consumer goods packaged for retail sale for personal use or packaged
for individual use. |
|
2933360000 |
4-anilino-N-phenethylpiperidine |
|
2933370000 |
N-phenethyl-4-piperidone |
2905140000
2933399000 |
Tert-butyl 4-(phenylamino) piperidine-1-carboxylate |
|
2933370000 |
Norfentanyl |
2933393000
2933399000 |
N-phenyl-4-piperidinamine |
| |
Biologics: This paragraph identifies certain biologics and
biological equipment. The; control on these items is intended to
hinder Russia bioweapons production capabilities. |
|
3507909000 |
Butyrylcholinesterase (BCHE) |
3002510000
3002590000
3002909000 |
Cell culture materials, including cell lines, vectors, plasmids, and
cell culture media,; |
2934999000
3822900020 |
Assay kits and reagents for nucleotide or peptide isolation,
extraction, purification, or,; |
2934999000
3822900020 |
Nucleotides, oligonucleotides, and reagents for oligonucleotide
synthesis,; or |
2922499000
2922509000
2937191000
2937199000 |
Amino acids, peptides, proteins, and resins and reagents for peptide
synthesis, |
8481801090
8481809000
8419509000 |
Reaction vessels, Fermenters, agitators, heat exchangers,
condensers, pumps (including single seal pumps), valves, storage
tanks, containers, receivers, and distillation or absorption
columns,; |
8481801090
8481809000 |
Vacuum pumps with a manufacturer's specified maximum flow-rate
greater than 1 m3/h (under standard temperature and pressure
conditions), casings (pump bodies), preformed casing-liners,
impellers, rotors, and jet pump nozzles designed for such pumps, in
which all surfaces that come into direct contact with the chemicals
being processed are made from controlled materials; |
9027891000
9027892090
9027909099 |
Laboratory equipment, including parts and accessories for such
equipment, for the analysis or detection, destructive or
non-destructive, of chemical substances,; |
3920999090
7213999000
8481809000 |
Whole chlor-alkali electrolysis cells (mercury, diaphragm, and
membrane) and “components” “specially designed” therefor as follows:
a. Electrodes;
b. Diaphragms; and
c. Ion exchange membranes; |
|
8414809900 |
Compressors “specially designed” to compress wet or dry chlorine,
regardless of material of construction; |
8414700000
8419899090
9403309000 |
Class II biosafety cabinets and glove boxes |
8414592000
8414599000
8414609000 |
Floor-mounted fume hoods (walk-in style) with a minimum nominal
width of 2.5 meters,; |
9020001000
9020008000
9020009000 |
Full face-mask air-purifying and air-supplying respirators; |
8421399091
8421399092
8421399099 |
Conventional or turbulent air-flow clean-air rooms and
self-contained fan-HEPA filter units that may be used for P3 or P4
(BSL 3, BSL 4, L3, L4) containment facilities; |
3921909090
3923900000 |
Microwave reactors; |
3921909090
3923900000 |
Well plates; |
8479829000
8479899099
8479909090 |
Fermenters and components therefor,; |
8421191000
8421192000
8421193000
8421199000
8421910000 |
Centrifuges capable of separating biological samples, with a maximum
capacity of 5L, components and accessories therefor,, including
centrifuge tubes and concentrators;
Technical Notes for this paragraph:
1. For purposes of paragraph ‘continuous flow reactors’ consist in
plug and play systems where reactants are continuously fed into the
reactor and the resultant product is collected at the outlet.
2. For purposes of paragraph ‘modular components’ are fluidic
modules, liquid pumps, valves, packed-bed modules, mixer modules,
pressure gauges, liquid-liquid separators, etc. |
8421219090
8421220000
8421299090 |
Filtration equipment capable of use in handling biological
materials,; |
|
8543709090 |
Nucleic acid synthesizers and assemblers,; |
3822900020
9027892010
9027892090 |
Polymerase chain reaction (PCR) instruments; |
8428701000
8428702000
8428709000
8428909000 |
Robotic liquid handling instruments,; |
9027200000
9027909010
9027909099 |
Chromatography and spectrometry components, parts and accessories; |
9027892090
9027909099 |
Nucleic acid sequencers,; |
9026209000
9026809000
9026900000 |
Aerosol inhalation testing equipment, components, parts and
accessories,; |
9031809099
9031909000 |
Flow cytometry equipment, components, parts and accessories,; |
9031499000
9031809099 |
Probe sonicators, cell disruptors and tissue homogenizers; or |
9026101000
9026102000, 9026809000
9026900000 |
‘Continuous flow reactors’ and their ‘modular components’. |
| |
Quantum computing and advanced manufacturing: This paragraph
identifies additional equipment and other items that are believed to
not be manufactured in Russia or are otherwise important to Russia
in developing advanced production and development capabilities. |
8471419000
8471499000
8471900000 |
‘Quantum Computers’, and “specially designed” “electronic
assemblies” and “components” therefor, as follows:
a. Quantum processing units, qubitcircuits, andqubit devices;
b. Quantum control “components” and quantum measurement devices.
Note 1: For purposes of this entry, ‘Quantum Computers’ perform
computations that harness the collective properties of quantum
states, such as superposition, interference and entanglement. It
applies to circuit model (or gate-based) and adiabatic (or
annealing).
Note 2: Quantum processing units, qubit circuits and qubit devices
include but are not limited to semiconductor, superconducting, Ion
Trap, photonic interaction, silicon/spin, cold atoms.
Note 3: Quantum control “components” and quantum measurement devices
applies to items designed for calibrating, initializing,
manipulating or measuring the resident qubits of a quantum computer. |
8414400000
8414809230
9027909099 |
‘Cryogenic refrigeration systems’ designed to maintain temperatures
below 1.1k for 48hrs or more and “specially designed” cryogenic
refrigeration equipment and “components” as follows:
a. PulseTubes;
b. Cryostats;
c. Dewars;
d. GasHandlingSystem(GHS);
e. Compressors;
f. ControlUnits;
Note: ‘Cryogenic refrigeration systems’ include but are not limited
to Dilution Refrigeration, Adiabatic Demagnisation Refrigerators and
Laser Cooling Systems. |
8481801010
8481801090
8481809000 |
Ultra-High Vacuum (UHV) equipment as follows:
a. UHV pumps(sublimation, turbomolecular, diffusion, cryogenic,
ion-getter);
b. UHV pressure gauges.
Note: UHV means 100 nanoPascals (nPa) or lower. |
9030100000
9030399000
9030890000 |
High Quantum Efficiency (QE) photodetectors and sources with a QE
greater than 80% in the wavelength range exceeding 300nm but not
exceeding 1700nm; |
8474201000
8474209000
8479822000 |
Manufacturing equipment as follows:
a. Additive manufacturing equipment for the production of metal
parts; a.1.Powder-bed systems using Selective Laser Melting(SLM),
lasercusing; Direct Metal Laser Sintering(DMLS) or Electron Beam
Melting(ELB),or
Note 1: This entry identified under paragraph only applies to the
following systems:
b.Powder-fed systems using laser cladding, direct energy deposition
or laser metal deposition.
b.1 Additive manufacturing equipment for “energetic materials”,
including equipment using ultrasonic extrusion;
b.2 Vatphoto polymerisation additive manufacturing equipment using
Stereo Lithography (SLA) or Direct Light Processing(DLP) |
7205210000
7205290000 |
Metal powders and metal alloy powders “specially designed” for the
additive manufacturing equipment. |
9011101000
9011109000
9012101010
9012101090 |
Microscopes, related equipment and detectors, as follows:
a. Scanning Electron Microscopes(SEM);
b. Scanning Auger Microscopes;
c. Transmission Electron Microscopes(TEM);
d. Atomic Force Microscopes(AFM);
e. Scanning Force Microscopes(SFM);
f. Equipment and detectors “specially designed” for use with the
microscopes specified in 1 to 5. employing any of the following:
f.1 X-ray Photo Spectroscopy (XPS);
f.2 Energy-Dispersive X-ray Spectroscopy (EDX,EDS);
f.3 Electron Back Scatter Detector (EBSD) systems;
f.4 Electron Spectroscopy for Chemical Analysis (ESCA). |
8486207000
8486208100
8486208490
8486209900 |
‘Decapsulation’ equipment for semiconductor devices. Note:
‘Decapsulation’ is the removal of a cap, lid, or encapsulating
material from a packaged integrated circuit by mechanical, thermal,
or chemical methods. |
|
ㅡ |
“Software” “specially designed” or modified for the “development”,
“production” or “use” of the items specified in paragraphs 775
through 782 of this supplement. |
|
ㅡ |
“Software” for Digital Twins (DT) of additive manufacture products
or for the determination of the reliability of additive manufacture
products. |
|
ㅡ |
“Technology” for the “development”, “production” or “use” of the
items specified in paragraphs 775 through 784 of this supplement. |
|
854110 |
Diodes, other than photosensitive or light-emitting diodes (LED) |
|
854121 |
Transistors, other than photosensitive transistors with a
dissipation rate of less than 1 W |
|
854129 |
Other transistors, other than photosensitive transistors |
|
854149 |
Photosensitive semiconductor devices (excl. Photovoltaic generators
and cells) |
|
854151 |
Other semiconductor devices: Semiconductor-based transducers |
|
854159 |
Other semiconductor devices |
|
854190 |
Semiconductor devices: Parts |
|
854231 |
Processors and controllers, whether or not combined with memories,
converters, logic circuits, amplifiers, clock and timing circuits,
or other circuits |
|
854232 |
Memories |
|
854233 |
Amplifiers |
|
854239 |
Other Electronic Integrated Circuits |
|
854290 |
Electronic integrated circuits: Parts |
|
900630 |
Cameras specially designed for underwater use, for aerial survey or
for medical or surgical examination of internal organs; comparison
cameras for forensic or criminological purposes |
